Quote:
Originally Posted by Swift135
Tim, the guy that installed mine new what he was doing and the job was fine. The problem was that my Feb build car was not set up for plug N play for the wheel. From what I have heard all 135's March onwards build will accept the wheel with no issues. Rob at Trivett at Taringa installed it.
|
Thanks Swift. This makes me feel more confident!
Quote:
Originally Posted by andrew@southernBM
Take a breath and sing out a loud, 'You can do it'
I'll email the Aus instructions when your ready. The pickups on the Control units vary, and we dont use the OBD plug to bypass, so go with the Aust version. just email me when your ready:headbang:
|
Probably best I don't sing.., but I'd
really appreciate the Aust instructions. I've just emailed you.
Is there any issue with swapping the discs? I'll try & get hold of the factory manual for torque settings etc beforehand and swap the discs over before the standard pads bed into the standard discs. May even look at getting hold of good road/track pads beforehand. I run EBC greens on EBC disks with my E30 - though probably need at least reds as they're overheating at the track.
Thanks again Andrew!