Quote:
|
Originally Posted by Dackelone
Quote:
Originally Posted by froop
I asked the parts guy at my dealership in Sydney, Australia about the M3 rear subframe bushings and he said that the 2 front bushings were the same size, but the 2 rear bushings were different sizes. A big one and a small one. I didn't grab the part numbers from him, but maybe it's because I have an E88?
Anyone care to shed any light?
|
Your parts guy is miss informed. The M3(1M) rear subframe bushing WILL FIT in our e82's just fine.
The only difference is the forward mounts must be pressed out from under to above the subframe. The rears come out (and go back in) from the bottom side. So in order to press in the forward mounts... you have to drop the rear axle a foot or two - to have enough clearance for the tool to get up in there.
Dackel's replacement of rear suspension OE bushings with M3 onesÂ…
http://www.1addicts.com/forums/showt...1#post11189793 |
Do you know if this is the case for a convertible, E88 as well?