Quote:
Originally Posted by p66
No cost mod to help with sliding in your seat. Use the belt lock. Start by moving the seat back a few inches, then snap the shoulder belt tight. It will engage the lock. Keep tension on the belt and move the seat forward to your desired driving position. The belt will remain tight as long as you don't introduce slack. You will need to experiment with how far to move the seat back to get the desired tension. I used this technique with my 135i and 1M. Better than just a CG lock because it adds one shoulder belt. It's like a 3-point harness.
|
CG lock is the next best thing to a proper 4 or 5 point harness.