Quote:
Originally Posted by cpt97m3
First, this should probably go in the regular 1 series section, since it doesn't sound like you have a 1M.
You can do the M3 bushings without HPA's special tool. I did it with a E36 tool and some allthread, but others have done it with allthread, washers, and pipe fittings. A regular press would do it fine, but that would require taking the subframe out of the car, and that would be a lot of work. I would not recommend that, although I did it that way on my E36.
|
lol, didn't even notice.
At least i know it is possible, thats really all i was looking for. depending on how it looks when i get underneath, i might drop the whole subframe. I will need an alignment afterward anyway. I'll just figure it out when the time comes.