I have not been successful in resetting my brake pad sensor.
I replaced the pads and rotors a year ago, but the sensors were in fine shape so I did not replace them. About two months ago I received the YELLOW warning. Over the weekend I received the RED warning. I took off the driver's front wheel and the wires were broken, but I measured the pad thickness and I still have 12mm, so the pads are sound.
I replaced the sensor wire and the warning persists. I have read every thread I could find and watched some YouTube videos and attempted to reset the warning to no avail.
One thing I did learn is that the reset for a manual is different than a reset for an automatic, and I have tried both. I also have iDrive, but could not find mention anywhere of if this makes any difference.
Has anyone been successful in resetting this warning on a 2011 135i manual?
FYI: This is one of the threads I reviewed:
http://www.1addicts.com/forums/showt...+warning+reset