|
I have HPAutowerks Koni/swift coilovers and apex arc8s 18x8.5" et45 with 225/40/18s star specs on the front. I have my coilovers adjusted so the top of the tire is flush with the bottom of the fender. There was about 1mm of clearance between the coil adjusting screw and the sidewall of the tire. I'm currently running 235 star specs with a 10mm spacer. If I could do it all over again, I'd get the arc8 18x8.5 et38s, for the front. I'm also running with 2.4* or negative camber from M3 control arms and Dinan camber plates. Hope this helps
|