Quote:
Originally Posted by Greenkirby21
^^
your second exhaust tip seems to be hanging low D:
|
That would be pretty much impossible - since the 128 PE is a one-piece muffler with the tips welded on at the factory, and it uses the factory mounts. Put the two units side-by-side and they're identical except for the larger polished tips and lack of a flapper valve on the PE. The mounting rods are exactly the same. Note that there is a slight curve to the rear bumper, particularly to the cutout in the center section/diffuser. The PE and the stock muffler tips both follow this curve; if not, the inner pipe would appear closer to the top of the cutout.