Quote:
Originally Posted by Dackelone
Maybe you have to program the windown. ie: press and hold the window button on the full down and full up positions. I think that is how it is done. You might also check for any codes thrown. I am not sure if there is a ECU that stores codes for the window regulators - but it would not surprise me if there was such an ecu.
|
I tried that but no go
no movement or hint of a noise from the window/door. Only the double-click from the relay in the right-hand side footwell.
I am presuming that the window knows it has reached the top and bottom of its travel by sensing current- current rises indicating the motor has come up against resistance and the power is cut. So I think the relay noise is it sensing too much current (maybe from a short- damaged or wet/corroded wiring.)