Quote:
Originally Posted by tracer bullet
I'm pretty anal retentive, I took the headlight covers off (the black ones near the engine) and found a spot for the ballasts to sit in. Tested to make sure it'd go back together and they did. Next drilled some small holes in the cover and ran zip ties to hold the ballasts in place. Little bit of black RTV on the inside to keep things water tight, let dry, and installed.
Sounds ghetto, but the ballasts aren't going anywhere. Small black zip-ties (with the connection inside the light not outside) are tough to see, and I also have a pair of new OEM covers for reversing this mod if ever needed.
|
What are other folks doing with the ballasts?