|
Thanks to MikeinAlexandria for the PE exhaust DIY. I would have never considered doing this without the DIY. I just got done with this today on my non-msport 128i. It took me a few hours but it's very doable. The cut on the exhaust doesn't have to be super accurate (i was worried about this). Between the play in the rubber bushings and length of the sleeve there is room for error.
I also learned you have to get a bit aggressive with the left rubber bushing. It was really a matter or oriented myself under the car so i could best handle the exhaust and bushing at the same time.
Anyway, the sound is really nice. It's really not that aggressive, but much better than stock. I hope it doesn't dull with time, as I've read others have experienced.
|