|
That's gonna be a tough fit, largely dependent on how much you lower and what brand of tires you use. Up front you'll be very close to the strut, might need a 2 to 5mm spacer, hopefully not. I'd probably use a 225/35 tire instead. I think you'll need at between 2 and 3deg of camber. In the rear for sure you'll need max factory camber which is also 2-3 deg. A pull and at least a little trimming will be probably be needed.
Your wheels will be around 10mm more aggressive than mine. I can make mine fit without rubbing if I go with undersized tires. That extra 10mm will be tough to jam in there. Good luck, post plenty of pics.
__________________
Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, PSS4S 225/35fr 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, iCarbon diffuser, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille, Andrey_GTA rear hub mod, Ebay Mstyle front bumper and performance style side skirts.
|