Quote:
Originally Posted by Papethova
I did use a good amount of double side tape and I made sure there is no edge for the wind to catch and start a separation of lip and bumper. My lip appears to be affixed securely with no sign of weakness.
|
Yeah, based on your comment (I think) I went ahead and ran a bead of RTV Black along the front edge.
I had originally taped the crap out of it:
But while aligning the screw holes the tape grabbed and started to set while the lip was crooked so I went back with just 4 strips instead.
Someday I'll muster up the testiclular fortitude to test it out at sustained speed (I hope if it gives, it does so gradually) but until then...