Quote:
Originally Posted by dee0007
Do i need the screws for the fly wheel if im not changing the fly wheel? and why did you change the fly wheel how do you known you need to change it?
Also would you suggest i get a new slave cylinder ?
|
The flywheel surface wears along with the clutch. You may be able to resurface the flywheel, but after 10+ years and it being a 1M most owners replace instead of resurface. You'll at least want a new input shaft/pilot bearing (in the center of the flywheel) which will probably need to be pressed in, so you will need new bolts either way.
Yes, replace the slave cylinder while you're in there, and the pivot pin.