I got these LED`s
http://www.fuers-auto.de/product_inf...per-White.html (W1.2W (W2x4.6d / T5))
They're a bit weaker as the original ones.
You can't see spots on the sonar rings, they're just "whole" rings, but they're not that strong in daylight, but still visible, much better as the depo´s.
For the wires, you got
three red and
three thin black wires: One for the right ring, another one for the left ring and one for LED above and between the rings (they're pretty bright and could dazzle other car drivers..)
The
red wires are plugged in into the plus of the stand light (if you want the rings as stand light).
There is a cover on the high beam light, if you look at the wires (just right unter the high beam bulb) and follow them a bit you can see a
black and a
white wire:
White is
PLUS+ and
Black is
MINUS-.
Now you need something like this:
The
black wire of the LED rings get together with the
black stand light wires. You can cut the
white standlight wire and plug the
red LED wires with them
RED LED --->
WHITE Standlight
BLACK LED --->
BLACK Standlight
Kinda like that...