View Single Post
      11-16-2010, 06:37 PM   #61
AW128i
Major
AW128i's Avatar
United_States
43
Rep
1,003
Posts

Drives: E82 N51
Join Date: Nov 2010
Location: Southeastern, PA

iTrader: (1)

Quote:
Originally Posted by Knob View Post
I got these LED`s http://www.fuers-auto.de/product_inf...per-White.html (W1.2W (W2x4.6d / T5))

They're a bit weaker as the original ones.


You can't see spots on the sonar rings, they're just "whole" rings, but they're not that strong in daylight, but still visible, much better as the depo´s.

For the wires, you got three red and three thin black wires: One for the right ring, another one for the left ring and one for LED above and between the rings (they're pretty bright and could dazzle other car drivers..)

The red wires are plugged in into the plus of the stand light (if you want the rings as stand light).
There is a cover on the high beam light, if you look at the wires (just right unter the high beam bulb) and follow them a bit you can see a black and a white wire: White is PLUS+ and Black is MINUS-.

Now you need something like this:



The black wire of the LED rings get together with the black stand light wires. You can cut the white standlight wire and plug the red LED wires with them

RED LED ---> WHITE Standlight

BLACK LED ---> BLACK Standlight



Kinda like that...
Do you mean that the red and black wires for the LEDs need to be spliced with the yellow and black wires as shown in the red box in this pic?

Appreciate 0