|
Phase 1 - The Body Work: Measure, Measure, Measure
This update is all about measuring the quarter panel against the chassis to see where the final cuts are needed. We measured, test fit and measured some more. Then we made initial cuts in the existing quarter panel. These were intentionally smaller than the final cuts to give us room to fine tune the fit.
As you can see from the wheel well picture, their is a significant gap between the outer 1M quarter panel and the inner 135i quarter panel. This is exactly why we got both the inner and outer quarters.
For now we are focusing on the outer quarters and getting that fit right, then we will move to the inner quarters.
__________________
Current: 1///M3 Clone 2.0 - The Build Log, 2009 E90 ///M3 - JB | BLK | SPEED CLOTH | SLICKTOP | 6MT
Previous: 2005 E46 ///M3 - IB | M CLOTH, 1999 E36 ///M3/2/5 DINAN S3 - Estoril | BLK, 1999 E36 ///M3/2/5 - TiAg | BLK, 1998 E36 ///M3/4/5 - Estoril | BLK, 2005 E46 ///M3 - SG | CIN, 2002 E39 ///M5 - TiAg | BLK, 2010 E92 ///M3 - LMB | BLK, 2008 E90 ///M3 - IB | BLK, 2006 E46 ///M3 - IR | CIN
|