Quote:
Originally Posted by andrey_gta
I was looking at yours, do you have a better image?
I need to see the headings to make sure I have the right scale to make it comparable. There are 2 smoothing choices STD and SVA
|
My Smoothing says
CF: SAE Smoothing: 5 on right upper corner.
As far as I read from another forum "STD is Another power correction standard determined by the SAE. Power is corrected to reference conditions of 29.92 InHg (103.3 kPa) of dry air and 60 F (15.5°C). Because the reference conditions include higher pressure and cooler air than the SAE standard, these corrected power numbers will always be about 4 % higher than the SAE power numbers. Friction torque is handled in the same way as in the SAE standard.""
So if mine was STD, it would be 198x1.04= 205.92 HP...So looks like you have roughly +5 HP?