Thread: burnouts?
View Single Post
      05-10-2013, 06:52 PM   #10
abirmaher
Colonel
abirmaher's Avatar
United_States
842
Rep
2,364
Posts

Drives: 2018 BMW M2 & 2024 BMW X1 M35i
Join Date: Feb 2010
Location: Fort Lauderdale, FL

iTrader: (14)

Garage List
  [0.00]
2018 BMW M2  [10.00]
You have to turn the traction control all the way off and put it in sport or manual. If you put your foot all the way down past the point of resistance and itll kick the clutch in and youll spin the tires just fine. If you press the sport button itll help too.

Also just to clear it up as far as launch control for the DCT on the 135 these are the steps:

1. Put the car in Manual mode
2. Press the DSC button once so that DSC shows up on the dash
3. Turn the sport button on
4. Press the break
5. While holding the break press the gas down past the resistance point and hold it
6. The car will rev to about 3500 RPM and a race flag will come up
7. When you are ready to launch let go of the break. Keep your foot all the way down until you get to what your willing to go to. If you keep your foot down the shifting will be optimized all the way through the gears. Makes a big different.

Hope this helped.
__________________
Follow my builds:
The Racecar (2018 M2 - M0010): Build Thread | @_m0010
The Daily (2024 X1 M35i - X001M35):Build Thread | @_x001m35
Appreciate 0