Well i got this done. Sadly one of the fogs didnt work after installation.
Pretty easy installation. Best way i found is to do the installation from the hood.
DO NOT uncover the bottom. There is so many covers and things that it is so much easier just to reach in from the hood.
The passenger side is the easiest because there is plenty of space to get in there.
The driver side is still easy but involves more work. You have to uninstall the intake box. There are 2 screws holding it down to the frame. Take those off. Take the sensor off and loosen the belt that connects to the hose. The other side is just 2 clips.
Once you have the intake box off. You again have plenty of space to put your hand down there.
The lights all you have to do is turn it. I dont remember which way but it is very simple. If its not turning when you turn it. Then GO THE OTHER WAY
Once you take it out. Then go ahead and put the replacement bulb and repeat all the steps above in reverse.
The bulbs that i bought work perfectly with no errors or hazard lights.
Let me know if this helped anyone