|
This is the thread that brought me to this forum, so I figure that I should get my first post in here with a tip that might help some.
When you take off the little black plugs on the bottom of the door towards the rear, and the other one at the rear towards the bottom, you will notice that you can see the sprocket looking piece if you move the window about 2/3 to 3/4 way down. If you get a long 1/4 inch ratchet extension, you can use the back end to tighten it if your sprocket is loose giving play to the glass. I was trying to fix my passenger glass because it had play, and didn't go as high up as the driver side causing some wind noise. This allowed me to correct the problem without having to pull off the door panel and the rest of the stuff. Use a small light on the bottom hole when looking into the rear one. Hope this helps someone, and thank you guys for the pictures and description of what I would find in there.
|