Quote:
Originally Posted by vincent860906
Dam that's unfortunate thank you for answering!
I noticed you said this wouldn't be a limited production so I assume you guys would be listing this spec (17x9j et52) on your website for purchase.
So I'm wondering if it's possible to run a different wheel spec in the front while running the 17x9 et52 in the back. I know that wouldn't eliminate the availability to rotate the tires but I just want to know what wheels would you guys recommend for factory style suspension components now you guys have the new 17x9 et52.
(Hopefully still be able to have a square setup to combat the understeers)
|
We will be listing the 17x9" ET52 on the site for individual purchase once the group buy ends. You certainly could run that size in back, however up front in a 17", your best best would likely be the 17x8.5" ET40. With that wheel, you could fit a 235/40-17 or a 235/45-17. You would likely still need adjustable camber plates however, if looking to run a 245/40-17 up front. The camber gained from the Dinan plates likely isn't enough to avoid rubbing at the fender with a 245 width tire.
-Ian