Front swaybar w/ 27mm bar including bushings and links $285.00
Rear swaybar w/ 19mm bar including bushings and link $210.00
Buy the front/rear together and save $20.00
Free shipping!
Quote:
Technical details
As an example of our attention to detail, the E87 BMW 1-series Sway Barbarians is a very unique set of bars. Features include:- Adjustable 27mm Front Bar
- Adjustable 19mm Rear Bar
- Revised contouring for maximum clearance even with extremely lowered cars.
- Precision-cut adjustable ends.
- Positive-stop rear bushing guides assure bar stays in place.
- Adjustable front end links with fully isolated bearing for silent operation - no clunks or rattles.
- Urethane bushings, hardware kit, and lubrication included.
|
Quote:
Superior Materials
We put our bars through this extensive process to insure that the final product will be the strongest, most durable bar on the market, and that it will be the most resistant to form alteration.
Adjustability
The UUC BMW SwayBarbarian uses a multi-hole system on the front and rear bars which allows for fine tuning of the bar for whatever desired effect, without sacrificing body roll.- Front Bar: 3 hole adjustment
- Rear Bar: 2 hole adjustment
Adjustable endlinks
Adjustable endlinks for perfect fit and pre-load setup with any amount of suspension lowering. Endlinks have spherical bearing ends identical to the BMW original equipment (OE) style for long noise-free life. No squeaking, clunking, or clicking as with "race" links.
Positive-placement rear bushing stops
To keep the tight-tolerance rear bar from shifting side-to-side, they are fitted with postiive-placement stops, rings around the bar that hold the bar in place against the bushings.
Powdercoated Finish
After the bars are CNC mandrel bent and the ends are forged and punched, a silver powdercoat is applied for a smooth, long lasting finish in a similar process to how BMW factory bars are coated. This smooth finish allows the bars, when properly installed with polyurethane bushings and grease, for long term performance with minimal maintenance.
Polyurethane Bushings
The UUC BMW SwayBarbarians include replacement delrin-lined polyurethane bushings which are built to "aircraft spec" (literally - our urethane fabrication facility uses the same material and production guidelines as they do for Boeing). This results in a durable bushing that will not disintegrate and has longer re-lubrication intervals for long lasting, quiet results. Be sure to use generous amounts of grease to ensure maximum performance from your SwayBarbarians!
|