|
|
|
07-17-2018, 07:16 PM | #1 |
New Member
5
Rep 11
Posts |
Another 130i caliper question
Hi all,
I'm up for new rotors and pads soon, so contemplating just doing a full upgrade. Can anyone suggest calipers and rotors that will fit the standard 17" 207m wheels? Cheers Mark |
07-25-2018, 01:11 AM | #2 |
Private First Class
13
Rep 187
Posts |
135i 6pot front calipers fit a 130i under those 17"wheels.
The fit pre LCI and LCI and are a direct bolt on. LCI cars had them as an option.
__________________
2006 E87 130i
M3 front and rear arms, M3 Front and rear ARB , Quaife LSD, BMW performance wheel (non electronic), 135i Brakes, DS2500 pads, Apex wheel studs, Adjustable Bilsteins, API Half cage, Hankook Z221's (track) and Bridgestone RE002's (street) 225's all around |
Appreciate
0
|
08-06-2018, 09:01 PM | #4 |
Private First Class
13
Rep 187
Posts |
Rears are a pain to do it properly by changing the hub flange. You can use a spacer behind the rotor as a easier alternative but you lose most of the lip to mount the wheel onto.
If i was to do it again i'd leave them stock unless you want the looks.
__________________
2006 E87 130i
M3 front and rear arms, M3 Front and rear ARB , Quaife LSD, BMW performance wheel (non electronic), 135i Brakes, DS2500 pads, Apex wheel studs, Adjustable Bilsteins, API Half cage, Hankook Z221's (track) and Bridgestone RE002's (street) 225's all around |
Appreciate
0
|
08-08-2018, 08:43 PM | #5 |
Not that left, your other left!
22
Rep 120
Posts |
I have done rears on my 130i PreLCI.
Took me awhile to find, but this is the correct BMWP rear rotor to fit the caliper without any modification: 34216795755KT (you will need to trim the dust shield to fit the caliper though) Goodluck!
__________________
-
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|