Replacement jack points

MZWIE · 11-03-2011, 01:58 PM

Who makes replacement jack points. I don't want the OEM's. I have not been able to find any when I do a search.

igzekyativ · 11-03-2011, 02:05 PM

Quote:

Originally Posted by e34m5

Who makes replacement jack points. I don't want the OEM's. I have not been able to find any when I do a search.

+1

infinitekidM2C · 11-03-2011, 02:15 PM

+2

GaryS · 11-03-2011, 02:25 PM

http://www.ecstuning.com/BMW-E82-135...rior/ES261781/

edit: this link is better: http://www.ecstuning.com/BMW-E82-135...ance/Exterior/

MZWIE · 11-03-2011, 02:38 PM

Those are OEM pads. Perhaps I need to make something myself. Good weekend project.

pixelblue · 11-03-2011, 03:16 PM

I don't know of any direct replacements but you can get these as an adaptor to save the plastic. I am thinking of getting but I need to know if it'll clear the jack since my car is really low.

http://www.reverselogic.us/ReverseLo...Pad_Tools.html

doublegbmw · 11-03-2011, 03:21 PM

Mike @ N54 Tuning has same jack pads for 20bucks, check them out.

GaryS · 11-03-2011, 03:31 PM

Quote:

Originally Posted by pixelblue

I don't know of any direct replacements but you can get these as an adaptor to save the plastic. I am thinking of getting but I need to know if it'll clear the jack since my car is really low.

http://www.reverselogic.us/ReverseLo...Pad_Tools.html

I have this pad and the one for jack stands. I'll be at SP Main this weekend. I'm not planning to bring jack or tools this time, but I'll bring the jack pads if you let me know.

adding: you only need about one inch clearance between the jack and car to fit the pad.

pixelblue · 11-03-2011, 03:42 PM

Gary,
the guy from reverse logic told me I need 3/4". I am not sure even if I have that much. have fun this weekend. I won't be there

MZWIE · 11-03-2011, 03:55 PM

In order for me to fit the jack under the pads I have to dirve the car onto some 2x6's first. Even after that I can barely fit the floor jack under the pads.

It's part of the reason I need to replace the pads. I've torn them up a bit when jacking up the car.

What I want is some solid versions of the OEM pads. The OEM's are designed to be used with the BMW jacks. The lift arm fits in the holes of the jack point so it won't slip.

I have some two part urethane I can mix up. I think I'll take the pads off and pour some of this in the holes. Then when I put them back it will be equivalent of a solid pad.

doublegbmw · 11-03-2011, 04:25 PM

how many inches did you lower your ride?....is your jack a lower profile style??

MZWIE · 11-04-2011, 08:51 AM

Quote:

Originally Posted by doublegbmw

how many inches did you lower your ride?....is your jack a lower profile style??

Performance Suspension. Very low profile jack.

GaryS · 11-04-2011, 10:43 AM

Quote:

Originally Posted by e34m5

Performance Suspension. Very low profile jack.

There must be something I'm not getting. I have Performance Suspension springs, and I have plenty of clearance above the jack even with the Reverse Logic jack pad hanging down 3/4". Looking at the ad, I see my jack lowers to 3.5".

pixelblue · 11-04-2011, 11:20 AM

Gary,
I'm lower than you. PS springs are .5" lower than stock. I'm like 1.5" lower at front

MPR1 · 11-13-2011, 11:18 AM

diy jack pad. works well with most type of jack stands and jacks.
$20 total in cost for 4.

SilverII · 11-19-2011, 05:46 PM

what is that metal piece?

ken1137 · 11-19-2011, 06:38 PM

awesome!..i have some pucks in my old hockey bag.

MPR1 · 11-19-2011, 09:25 PM

Quote:

Originally Posted by SilverII

what is that metal piece?

Metal piece is 1" x 2" steel that fits into the oem plastic jack insert. Load is carry to the jacking point instead of the plastic if you used the puck only.

tracer bullet · 11-21-2011, 12:10 PM

I cut off a section of 2 x 4 and that was that. I have a low profile jack, I sit the 2 x 4 stub on it, line it up in the right place, and go.

I get using something better / cooler but really it's all you need to do. Well it's all I needed to do.

11-03-2011, 01:58 PM	#1
MZWIE Lieutenant Colonel 398 Rep 1,660 Posts Drives: M2 Join Date: Jun 2007 Location: GEORGIA iTrader: (0)	Replacement jack points Who makes replacement jack points. I don't want the OEM's. I have not been able to find any when I do a search.
	Appreciate 0 Tweet Quote

11-03-2011, 02:15 PM	#3
infinitekidM2C Major General 4295 Rep 5,735 Posts Drives: 2019 M2 Competition Join Date: Nov 2007 Location: Orange County, CA iTrader: (4) Garage List 2019 M2 COMPETITION [9.75] 2008 135i (my old car) [7.56]	+2
	Appreciate 0 Quote

11-03-2011, 02:25 PM	#4
GaryS Colonel 39 Rep 2,084 Posts Drives: 2009 135i 6MT Join Date: Feb 2010 Location: Maryland iTrader: (0) Garage List 2009 135i [6.50]	http://www.ecstuning.com/BMW-E82-135...rior/ES261781/ edit: this link is better: http://www.ecstuning.com/BMW-E82-135...ance/Exterior/
	Appreciate 0 Quote

11-03-2011, 02:38 PM	#5
MZWIE Lieutenant Colonel 398 Rep 1,660 Posts Drives: M2 Join Date: Jun 2007 Location: GEORGIA iTrader: (0)	Those are OEM pads. Perhaps I need to make something myself. Good weekend project.
	Appreciate 0 Quote

11-03-2011, 03:16 PM	#6
pixelblue Colonel 142 Rep 2,234 Posts Drives: the silver bullet Join Date: Feb 2010 Location: northern virginia iTrader: (2) Garage List 2010 135i [8.90]	I don't know of any direct replacements but you can get these as an adaptor to save the plastic. I am thinking of getting but I need to know if it'll clear the jack since my car is really low. http://www.reverselogic.us/ReverseLo...Pad_Tools.html Attached Images __________________ "I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"
	Appreciate 0 Quote

11-03-2011, 03:21 PM	#7
doublegbmw Private First Class 5 Rep 131 Posts Drives: 09 135i Join Date: Oct 2011 Location: vancouver iTrader: (2)	Mike @ N54 Tuning has same jack pads for 20bucks, check them out.
	Appreciate 0 Quote

11-03-2011, 03:42 PM	#9
pixelblue Colonel 142 Rep 2,234 Posts Drives: the silver bullet Join Date: Feb 2010 Location: northern virginia iTrader: (2) Garage List 2010 135i [8.90]	Gary, the guy from reverse logic told me I need 3/4". I am not sure even if I have that much. have fun this weekend. I won't be there __________________ "I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"
	Appreciate 0 Quote

11-03-2011, 03:55 PM	#10
MZWIE Lieutenant Colonel 398 Rep 1,660 Posts Drives: M2 Join Date: Jun 2007 Location: GEORGIA iTrader: (0)	In order for me to fit the jack under the pads I have to dirve the car onto some 2x6's first. Even after that I can barely fit the floor jack under the pads. It's part of the reason I need to replace the pads. I've torn them up a bit when jacking up the car. What I want is some solid versions of the OEM pads. The OEM's are designed to be used with the BMW jacks. The lift arm fits in the holes of the jack point so it won't slip. I have some two part urethane I can mix up. I think I'll take the pads off and pour some of this in the holes. Then when I put them back it will be equivalent of a solid pad.
	Appreciate 0 Quote

11-03-2011, 04:25 PM	#11
doublegbmw Private First Class 5 Rep 131 Posts Drives: 09 135i Join Date: Oct 2011 Location: vancouver iTrader: (2)	how many inches did you lower your ride?....is your jack a lower profile style??
	Appreciate 0 Quote

11-04-2011, 11:20 AM	#14
pixelblue Colonel 142 Rep 2,234 Posts Drives: the silver bullet Join Date: Feb 2010 Location: northern virginia iTrader: (2) Garage List 2010 135i [8.90]	Gary, I'm lower than you. PS springs are .5" lower than stock. I'm like 1.5" lower at front __________________ "I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"
	Appreciate 0 Quote

11-13-2011, 11:18 AM	#15
MPR1 New Member 2 Rep 24 Posts Drives: BMW 135i / X1 35i Join Date: Aug 2011 Location: Vancouver BC iTrader: (0)	diy jack pad. works well with most type of jack stands and jacks. $20 total in cost for 4.
	Appreciate 0 Quote

11-19-2011, 05:46 PM	#16
SilverII Colonel 40 Rep 2,334 Posts Drives: '11 335IS Join Date: Jun 2010 Location: DFW iTrader: (0) Garage List 2011 BMW 335IS [9.66]	what is that metal piece?
	Appreciate 0 Quote

11-19-2011, 06:38 PM	#17
ken1137 Brigadier General 90 Rep 3,731 Posts Drives: BMW S1000XR Join Date: Jun 2011 Location: Gilbert, AZ iTrader: (7) Garage List 2009 e90 335i [6.40]	awesome!..i have some pucks in my old hockey bag. __________________ BMWCCA member
	Appreciate 0 Quote

11-21-2011, 12:10 PM	#19
tracer bullet Brigadier General 3667 Rep 4,209 Posts Drives: '25 Z4, '15 X3 35i (135i sold) Join Date: May 2011 Location: Saint Paul, MN iTrader: (1)	I cut off a section of 2 x 4 and that was that. I have a low profile jack, I sit the 2 x 4 stub on it, line it up in the right place, and go. I get using something better / cooler but really it's all you need to do. Well it's all I needed to do.
	Appreciate 0 Quote