BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      10-16-2011, 05:02 PM   #1
135iDCT
Lieutenant
 
135iDCT's Avatar
 
Drives: 135I
Join Date: Apr 2011
Location: wm

Posts: 432
iTrader: (0)

im confused..help

what's better....
- full exhaust system
- dp
- keep the stock, but take off all the cats ( im thinking to do this)

what's the size of the stock exhaust?, 3 inches or less

let's said i did the last one, (stock without cats)when i use jb4 which map i should run?
135iDCT is offline  
0
Reply With Quote
      10-16-2011, 08:05 PM   #2
1speedbike
Colonel
 
1speedbike's Avatar
 
Drives: 2008 BMW 135i
Join Date: Jun 2008
Location: NJ, NYC, Baltimore

Posts: 2,934
iTrader: (15)

I don't understand. Isn't a "full exhaust" something that includes downpipes? So shouldn't that be the "best"?

Also, what's the difference between "dp" and "keep stock but take off all the cats". I am assuming that your car is N55 so there are no cats in the midpipes. So that would mean that both these choices involve changing the downpipes in order to get rid of the cats, so they are equal.

Downpipes will free up the most power. A set of catless downpipes on a stock car will probably free up to 15-25 horses, and more if you have a tune. It's a broad range because there are both 2.5" downpipes (stock size, but with no cats) and bigger sizes such as 2.75" (aFe) 3" (AR, AA, others). The 3" pipes will obviously be more free flowing and allow you more power, but will be more expensive. Also, consider getting a thermal coating on the downpipes to cut down on the heat.

An axleback + midpipes will free up maybe 15-20 horses at the most, even tuned, but will save more weight in the rear. The stock tubes are 2.5 inches. You can "upgrade" the midpipes and axleback to a bigger size, but the stock connections are 2.5 inches so it will bottleneck anyway and have no effect. You can get bigger downpipes because that is the fisrt thing the air from the turbos hits and letting this flow freer before a bottleneck down to 2.5 inches is still beneficial.

If you are running catless downpipes, you should run either map 2 (the more aggressive map) or map 5 (the autotuning map).
__________________

Year 1 of the 1
1speedbike is offline  
0
Reply With Quote
      10-17-2011, 06:00 AM   #3
135iDCT
Lieutenant
 
135iDCT's Avatar
 
Drives: 135I
Join Date: Apr 2011
Location: wm

Posts: 432
iTrader: (0)

thanx bro
135iDCT is offline  
0
Reply With Quote
      10-17-2011, 06:40 AM   #4
BrokenVert
Resident Kerbalnaut
 
BrokenVert's Avatar
 
Drives: Topless Electric Boogaloo
Join Date: Apr 2009
Location: Fahrvergnügen

Posts: 9,879
iTrader: (0)

To be fair, if you just pull the cats and dont do a tune you really wont notice that much of a difference. Without proper software the car will simply dump the wastegates more to negate the lack of backpressure in order to maintain factory spec.
__________________
BrokenVert is online now   United_States
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:55 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST