..::PSI::.. Forge Motorsport Intercooler for 1M Coupe & N55 135i/335i GROUP BUY!!

[Precision-sport]

Since there has been demand from numerous forum members for us to have a group buy for this item. . .it's finally here!

Group buy for Forge Motorsport intercooler for 1M Coupe & N55 equipped 335i

What it is:





This uprated intercooler has been designed for the BMW 335 equiped with the N55 (single turbo), and 1M equiped with the N54 (twin turbo) 6 cylinder engine. The criteria was to achive maximum efficiency whilst retaining a simple fitment. With Forge's testing results indicating increased cooling of up to 30 degrees centigrade and the ability to install this on your driveway at home in under one hour, we have just what we wanted.

Virtually zero modification necessary to install on your vehicle, this item utilizes OEM coupler with OEM snap-rings for a perfect seal every time!



The deposit will be a non-refundable $50.00 and can be paid via PayPal, a major credit card via a call to the shop, or in person for those local to us in the Orlando area. 6.5% sales tax applies to Florida residents. Our paypal address is paypal@precision-sport.com.

Shipping of product depend on what number you are on the list. The first run of this item is scheduled to arrive stateside in a couple short weeks, and will arrive in batches.
Intercooler will ship to you as soon as list has reached ten (10) and your order is payed in full.
We will put DEPOSIT next to your name on the list once the $50.00 is received, and PAID once full payment is received.
Please DO NOT make a deposit if your not 100% sure you want to purchase it.
Full payment for product will need to be made within one (1) week of group buy ending, which is Thursday, June 7th.

Please list your name below, in list format, if you're in, then contact us via PM, E-mail, or phone(during business hours) to complete the transaction.

--
THIS GROUP BUY ENDS THIS THURSDAY, MAY 31, 2012 AT 7PM EASTERN!!
1M Coupe & N55 335i Forge Intercooler Group by by Precision Sport Industries

1 - Aqua - PAID IN FULL
2 - ///M1 - PAID IN FULL
3 - BECAUZ - PAID IN FULL
4 - carlosii - PAID IN FULL
5 - Jet Mech - PAID IN FULL
6 - Chachirims - DEPOSIT
7 - MechE - PAID IN FULL
8 - Mdawood - PAID IN FULL
9 - Em/1 - PAID IN FULL
10 - Papethova - PAID IN FULL
11 - BMW Gator - PAID IN FULL
12 - -z- - PAID IN FULL
13 - SNOOPY11 - PAID IN FULL
14 - bdaddylo - PAID IN FULL

Had a nice delivery today from our friends at Forge Motorsport!


PSI x Forge Motorsport 1M Intercooler Group Buy by Precision Sport Industries, on Flickr

[Aqua]

Just sent you an email regarding Int'l shipping!

[Precision-sport]

Originally Posted by Aqua

Just sent you an email regarding Int'l shipping!

Replied!

[Aqua]

Shipping is reasonable. Please put me on the list!

[Precision-sport]

1M Coupe & N55 335i Forge Intercooler Group by by Precision Sport Industries

1 - Aqua - deposit pending

[ozinaldo]

Originally Posted by Frank@PSI

1M Coupe & N55 335i Forge Intercooler Group by by Precision Sport Industries

1 - Aqua - deposit pending

The same here, put me on the list.

[Precision-sport]

1M Coupe & N55 335i Forge Intercooler Group by by Precision Sport Industries

1 - Aqua - deposit pending
2 - ozinaldo - deposit pending

[///M1]

Definitely put me on the list, guys!

Thanks for running this GB, have been waiting for a board sponsor to organize one of these and price is great!

[Precision-sport]

Originally Posted by ///M1

Definitely put me on the list, guys!

Thanks for running this GB, have been waiting for a board sponsor to organize one of these and price is great!

You're on!

Updating original post from here on out.

[Gtrain]

Frank, when installing this FMIC, is there any trimming required? Also what's the size comparison over stock?

[Precision-sport]

Originally Posted by Gtrain

Frank, when installing this FMIC, is there any trimming required? Also what's the size comparison over stock?

According to Forge's instructions, there is no trimming required. Obviously that means the size is going to be relatively compact as it's fitting in an OEM location with no modification.

It's definitely larger than stock, as well as bar'n'plate with aluminum end-tanks.

[EINSER M]

Originally Posted by Gtrain

Frank, when installing this FMIC, is there any trimming required? Also what's the size comparison over stock?

from the other thread on this FMIC

"The OEM core is 510w x 130h x 110d where the Forge core is 530h x 150w x 130d"

[Precision-sport]

Originally Posted by EINSER M

from the other thread on this FMIC

"The OEM core is 510w x 130h x 110d where the Forge core is 530h x 150w x 130d"

Thank you!

[Gtrain]

Originally Posted by Frank@PSI

According to Forge's instructions, there is no trimming required. Obviously that means the size is going to be relatively compact as it's fitting in an OEM location with no modification.

It's definitely larger than stock, as well as bar'n'plate with aluminum end-tanks.

Are there any instructions that can be posted? Looking to have a complete no trimming solution. If trimming is found to be necessary, can the product be returned for a full refund?

Originally Posted by EINSER M

from the other thread on this FMIC

"The OEM core is 510w x 130h x 110d where the Forge core is 530h x 150w x 130d"

Thanks. I didn't see it in the other install thread. Looks like it's about 40% larger than stock.

[Precision-sport]

Originally Posted by Gtrain

Are there any instructions that can be posted? Looking to have a complete no trimming solution. If trimming is found to be necessary, can the product be returned for a full refund?

Check this here. . .it mentions something CAN be trimmed, but is not required to be trimmed for install. Check step #7.

"In the space left behind in the bumper, you need to move the lower trim as shown below – basically its just plastic folded over the cross member. Working from one end the plastic can be teased off along the length. For more airflow to the core, this section can be cut off at your discretion but it is NOT NECESSARY in order to install the core."

http://forgemotorsport.com/media/FMINT1M.pdf


We have installed FMIC for the N54 335i in our shop, and have never had to trim. Although this is a different product, I believe the fitment is pretty much the same.

[Precision-sport]

Just added another to the list; we're at 4 already!

[Gtrain]

Originally Posted by Frank@PSI

Check this here. . .it mentions something CAN be trimmed, but is not required to be trimmed for install. Check step #7.

"In the space left behind in the bumper, you need to move the lower trim as shown below – basically its just plastic folded over the cross member. Working from one end the plastic can be teased off along the length. For more airflow to the core, this section can be cut off at your discretion but it is NOT NECESSARY in order to install the core."

http://forgemotorsport.com/media/FMINT1M.pdf


We have installed FMIC for the N54 335i in our shop, and have never had to trim. Although this is a different product, I believe the fitment is pretty much the same.

Hi Frank,

Thanks for the clarification and instructions, it looks like that piece just needs to be pushed down instead of being trimmed which is a great solution.

Thanks for the information.

[Precision-sport]

Originally Posted by Gtrain

Hi Frank,

Thanks for the clarification and instructions, it looks like that piece just needs to be pushed down instead of being trimmed which is a great solution.

Thanks for the information.

You're welcome! Interested in being a part of the deal?

[-cj-]

Are FMIC upgrades a noticeable upgrade? I know it lowers your BATs, but will that alone improve performance? Or do you need a tune that raises the PSI a bit? (I'm interested in joining this GB, but I'm on the fence about whether this is a noticeable upgrade?)

[PunjabiM3]

Just about ready to put my name on the list and put down the deposit. I do have some technical questions. One being how does the size and overall efficiency of this FMIC compare to say the one from CP-E, Evolution Raceworks, and Evolve? My plan is to upgrade the FMIC, and some time after get 3" catless DP's, BOV, charge pipe, and a stage 2 tune from either Evolve or GIAC. Just want to make sure I am getting the best parts for the car to make good power while running safe and increasing efficiency. Would appreciate some input prior to taking the plunge on this (or any other) FMIC...

[David@PSI]

Originally Posted by -cj-

Are FMIC upgrades a noticeable upgrade? I know it lowers your BATs, but will that alone improve performance? Or do you need a tune that raises the PSI a bit? (I'm interested in joining this GB, but I'm on the fence about whether this is a noticeable upgrade?)

To take full advantage of a FMIC upgrade, you would need a tune. That said, when installed without a tune, you will still see a noticeable power gain. Cooler air and less restriction will always make more power.

[Precision-sport]

Originally Posted by PunjabiM3

Just about ready to put my name on the list and put down the deposit. I do have some technical questions. One being how does the size and overall efficiency of this FMIC compare to say the one from CP-E, Evolution Raceworks, and Evolve? My plan is to upgrade the FMIC, and some time after get 3" catless DP's, BOV, charge pipe, and a stage 2 tune from either Evolve or GIAC. Just want to make sure I am getting the best parts for the car to make good power while running safe and increasing efficiency. Would appreciate some input prior to taking the plunge on this (or any other) FMIC...

They're all going to be pretty similar in performance, as they're all similar size. The main thing we like specifically about the Forge unit is the ability to 100% go back to stock if need be, as it utilizes the OEM intercooler connections. There is no permanent modification needed like other brands, where you have to cut the clamps off the OEM couplers to make them work.

This means install and removal are a breeze!