Performance Friction 08 Compound for your E82 1M - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

HP Autowerks · 08-08-2012, 07:57 PM

PFC08 Compound is one of the PFC newest and have gained immediate favor in Endurance Sportscar, and GT racing due to its peformance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release and modulation characteristics, and very low abraded disc wear. In addition to its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.

BMW 1M fitment for both front and rear axles.

$249.01 Front
$213.05 Rear

Available now!

Order here:

http://www.hpashop.com/Performance-F...ompound-08.htm

HP Autowerks · 08-10-2012, 02:46 AM

Bump!

4thM3 · 08-11-2012, 02:09 AM

Forgot to ask how they are for dust and squeal. Would they make a good everyday pad or just track?

HP Autowerks · 08-11-2012, 02:28 AM

Quote:

Originally Posted by 4thM3

Forgot to ask how they are for dust and squeal. Would they make a good everyday pad or just track?

These are track only pads. In short, they are an endurance version of the PFC01 race pads.

Jet Mech · 08-11-2012, 05:55 PM

I like to squeal like a school bus when i go to the track...cause everyone looks and they know im serious.

HP Autowerks · 08-12-2012, 12:25 PM

Quote:

Originally Posted by Jet Mech

I like to squeal like a school bus when i go to the track...cause everyone looks and they know im serious.

That is one way to tell everyone in the pits that you mean business as you pull in!

firechicken99 · 08-14-2012, 02:50 PM

Quote:

Originally Posted by 4thM3

Forgot to ask how they are for dust and squeal. Would they make a good everyday pad or just track?

Harold has an awesome deal on these! He shipped a set to me recently in time for my HPDE this friday and so far so good! The dust is moderate, however to my surprise I found it completely rinses right off with a hose!

I drove them 3 hours out of state for work this monday. Because they are full track pads there are no clips and no soft/rubber backing to them. The only time they squeal is with very light brake application at sub 7mph speeds and warmed up (ex. coming to a stop light). Its my understanding these squeal much less than the 01's and are much less abrasive on your rotors (In fact less abrasive than stock pads). You may be able to combat the squeal with CRC Brake Quiet if you follow the instructions and let it cure for 20 minutes before installing the pads. Personally, I can live with it until friday when I go to Lime Rock!

All in all, GREAT deal on these sweet track pads and a GREAT vendor!

M3 Adjuster · 08-15-2012, 03:45 PM

Quote:

Originally Posted by firechicken99

Harold has an awesome deal on these! He shipped a set to me recently in time for my HPDE this friday and so far so good! The dust is moderate, however to my surprise I found it completely rinses right off with a hose!

I drove them 3 hours out of state for work this monday. Because they are full track pads there are no clips and no soft/rubber backing to them. The only time they squeal is with very light brake application at sub 7mph speeds and warmed up (ex. coming to a stop light). Its my understanding these squeal much less than the 01's and are much less abrasive on your rotors (In fact less abrasive than stock pads). You may be able to combat the squeal with CRC Brake Quiet if you follow the instructions and let it cure for 20 minutes before installing the pads. Personally, I can live with it until friday when I go to Lime Rock!

All in all, GREAT deal on these sweet track pads and a GREAT vendor!

any rattle from the pads in the caliper like the 01s ?

firechicken99 · 08-16-2012, 03:37 PM

Quote:

Originally Posted by M3 Adjuster

any rattle from the pads in the caliper like the 01s ?

I would assume it is possible because the pads have no backing, no clips, or anything else. Just the metal back of the pad and ears. They do fit snugly in the caliper once bolted back together, and although I wont be on the track until tomorrow morning, all week on the road they have not had any "rattle". They do squeal if you try and brake using very very light pressure (ex. rolling up to a light) but thats just the pads telling you you are not giving them the work out they want and deserve!

HP Autowerks · 08-29-2012, 05:04 PM

In stock and shipping now!

HP Autowerks · 09-11-2012, 06:04 PM

On the shelf!

HP Autowerks · 09-28-2012, 05:38 PM

Back in stock and ready to ship!

HP Autowerks · 10-16-2012, 07:24 PM

In stock for your 1M or M3!

HP Autowerks · 11-28-2012, 05:50 PM

These pads are good in stock guys!

Blue55 · 12-09-2012, 04:03 PM

How many track days are folks getting on these? Especially interested in hearing from those folks who have higher HP cars.

firechicken99 · 12-10-2012, 01:09 PM

Quote:

Originally Posted by Blue55

How many track days are folks getting on these? Especially interested in hearing from those folks who have higher HP cars.

Wear wasnt bad after 1 event of pretty heavy use. Unfortunately my season was on hold after that so I dont have more info for you. These pads are great.

HP Autowerks · 01-29-2013, 05:01 PM

All new shipments have spring clips on the pads!

HP Autowerks · 02-04-2013, 08:44 PM

PFC08 ready to ship with spring clips!

HP Autowerks · 03-15-2013, 02:24 PM

Bump!

HP Autowerks · 03-23-2013, 11:55 AM

Bump!

HP Autowerks · 05-03-2013, 09:56 PM

Good in stock!

08-08-2012, 07:57 PM	#1
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Performance Friction 08 Compound for your E82 1M PFC08 Compound is one of the PFC newest and have gained immediate favor in Endurance Sportscar, and GT racing due to its peformance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release and modulation characteristics, and very low abraded disc wear. In addition to its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite. BMW 1M fitment for both front and rear axles. $249.01 Front $213.05 Rear Available now! Order here: http://www.hpashop.com/Performance-F...ompound-08.htm Attached Images Last edited by HP Autowerks; 03-15-2013 at 02:24 PM.
	Tweet

08-11-2012, 05:55 PM	#5
Jet Mech Private First Class Drives: 2011 1M Coupe VO Join Date: Mar 2011 Location: Louisville, KY Posts: 193 iTrader: (0)	I like to squeal like a school bus when i go to the track...cause everyone looks and they know im serious. __________________ 2011 1M Coupe VO 2008 Mazdaspeed 3 (Mine) 2010 VW Sportwagon TDI (Wifes) 2001 S54 M Coupe (Sold) 1998 M3/4 (Sold)

08-29-2012, 05:04 PM	#10
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Performance Friction 08 Compound In stock and shipping now!

09-28-2012, 05:38 PM	#12
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	PFC01 Race Pads - Long Wear Back in stock and ready to ship!

10-16-2012, 07:24 PM	#13
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Performance Friction 08 Compound In stock for your 1M or M3!

08-10-2012, 02:46 AM	#2
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Bump!

08-11-2012, 02:09 AM	#3
4thM3 Private First Class Drives: 2011 AW 1M Join Date: Mar 2012 Location: Marin County, CA Posts: 105 iTrader: (0)	Forgot to ask how they are for dust and squeal. Would they make a good everyday pad or just track?

09-11-2012, 06:04 PM	#11
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	On the shelf!

11-28-2012, 05:50 PM	#14
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Performance Friction 08 Compound These pads are good in stock guys!

12-09-2012, 04:03 PM	#15
Blue55 First Lieutenant Drives: 1M Join Date: May 2009 Location: Earth Posts: 370 iTrader: (0)	How many track days are folks getting on these? Especially interested in hearing from those folks who have higher HP cars.

01-29-2013, 05:01 PM	#17
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	All new shipments have spring clips on the pads!

02-04-2013, 08:44 PM	#18
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	PFC08 ready to ship with spring clips!

03-15-2013, 02:24 PM	#19
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Bump!

03-23-2013, 11:55 AM	#20
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Bump!

05-03-2013, 09:56 PM	#21
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Good in stock!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search