BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      08-22-2012, 10:57 PM   #1
KEI7
First Lieutenant
KEI7's Avatar
United_States
6
Rep
330
Posts

 
Drives: 2012 135i coupe
Join Date: Jan 2012
Location: Chicago

iTrader: (0)

KEI7 photo thread

EDIT 2/10/2013

Changed title thread to continue adding photos. (not showing somehow...)

So after putting on coilovers and rims and little bits and pieces I've been fairly quiet on mods for the last couple of months.

Anyway now it's winter in Chicago (not so bad this year), not a very pleasant time to go out and shoot photos...

Anyways got myself a new camera a few weeks back (first DSLR!) and had a chance to go out to Dekalb in the open prairie.

MAN WAS IT COLD... country roads were all icy!!
I had a lot of fun though lol

icy road + FR + winter tires = FUN


IMG_0272


IMG_0269


IMG_0241


IMG_0291


IMG_0319

The last photo was the night lights when I got back to the city.

Spring is definitely on the way(i hope) and i'm coming back to modding.
Just got myself new front lip, rear diffuser and exhaust, so will update once those are on



ORIGINAL POST 8/22/2012

So I had enough share of my stock experience, and set on to mods

First things first, wheels changed and coilovers installed as my first and foremost mods.


Wheels and tires I got from a very nice forum member about a month ago and KWs were installed at IND.


Wheels

F: 8.5J +45 (with 5mm spacers)
R: 9.5J +45 (no spacer)


Tires

F: 215/35/19
R: 235/35/19

For height I requested just low enough so that there is no space between the outside wall of the tire and the fender when seen from the side.

Silver V713s look pretty nice on LM Blue I suppose.

Inner treads are starting to disappear ... lol
Attached Images
        

Last edited by KEI7; 02-11-2013 at 12:53 AM. Reason: to update thread
Appreciate 0
      08-22-2012, 11:11 PM   #2
135Pats
Turbo's Here
135Pats's Avatar
United_States
61
Rep
5,678
Posts

 
Drives: 135i
Join Date: May 2012
Location: Maryland

iTrader: (2)

Gorgeous, the wheels themselves and the fitment. Really nice
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586r Tial .82AR/Meisterschaft Race/Berk Resonated/ER CP/Synapse/VRSF FMIC/FFTEC LPFP/HFS-4 DO Stainless Lines/BMS Thermostat Delete/Rob Beck PCV Valve + Cap/BMS OCC/ST Coilovers/M3 FCA + Tension Rods/M3 Subframe Bushings/M3 FSB/DINAN Camber Plates/Apex ARC-8/Project Kics/VAC Hubs/Rogue Transmission Mounts/Alpina TCU Flash/Icarbon/Kerscher/BMW Performance
Appreciate 0
      08-22-2012, 11:25 PM   #3
510135
Captain
Australia
14
Rep
794
Posts

 
Drives: f32
Join Date: Jan 2012
Location: Earth

iTrader: (0)

wheels look good When you do your tyres next maybe run 245 I see you are running +45 in the rear offset, I dont know how you would go with a 255 in the rear without rubbing at that height.
Appreciate 0
      08-22-2012, 11:39 PM   #4
uberschnell
Brigadier General
uberschnell's Avatar
No_Country
71
Rep
3,424
Posts

 
Drives: // 135i //, X5
Join Date: Mar 2007
Location: Bay Area

iTrader: (44)

Looks ok I guess. You gave up performance for looks
__________________
- 08 135i - Wavetrac LSD, AST 4100, Swift springs, Brembo GT brakes, M3 front sway, Meyle HD links, Dinan Camber plates, Whiteline subframe bushings, M3 rear guide and upper link, M3 front control arms, HP custom M3 front Strut brace, Megan rear control arms, F30 brake shields -
Appreciate 0
      08-23-2012, 12:05 AM   #5
ken1137
Brigadier General
ken1137's Avatar
United_States
41
Rep
3,697
Posts

 
Drives: a slow 2009 e90 335i
Join Date: Jun 2011
Location: Chicago

iTrader: (7)

Garage List
2009 e90 335i  [3.20]
Love the v701's...have them on my 335. Maybe paint the calipers to stand out more Cant believe you running like that in Chicago...you've got major cojones GL!
__________________

BMWCCA member
Appreciate 0
      08-23-2012, 06:11 AM   #6
EuroTunerz5
Captain
13
Rep
667
Posts

 
Drives: 2012 AW BMW 135i M-Sport PPK
Join Date: Apr 2012
Location: Wisconsin

iTrader: (6)

Those are v713.... They were mine before
__________________
2012 BMW 135i M-Sport PPK AW with Black Boston Leather- SOLD
2010 Acura TSX V6 Tech BSM
2003 Corvette Z06 TR "Widebooty"
Appreciate 0
      08-23-2012, 06:14 AM   #7
EuroTunerz5
Captain
13
Rep
667
Posts

 
Drives: 2012 AW BMW 135i M-Sport PPK
Join Date: Apr 2012
Location: Wisconsin

iTrader: (6)

Quote:
Originally Posted by nik0123
wheels look good When you do your tyres next maybe run 245 I see you are running +45 in the rear offset, I dont know how you would go with a 255 in the rear without rubbing at that height.
Those tires run very large so a 235 in those looks like a 245.... Sizes can be deceiving on some tires.


Btw didn't I tell you no fender work needed with this set up
__________________
2012 BMW 135i M-Sport PPK AW with Black Boston Leather- SOLD
2010 Acura TSX V6 Tech BSM
2003 Corvette Z06 TR "Widebooty"
Appreciate 0
      08-23-2012, 06:58 AM   #8
flinchy
Colonel
38
Rep
2,864
Posts

 
Drives: 130i
Join Date: Nov 2011
Location: QLD, Australia

iTrader: (0)

i fit a 245 tire, identical setup, and you can easily EASILY fit a 255 and it's still stretching.

265 would be almost stretched even.

considering 245mm is 9.5 inches.. on a 9.5" wheel, and flush is around 10.5" tire (aka 265mm)

my 245's have a LOT of stretch, your 235's would be retarded... 255 still stretches on and easily fits inside the guard.

ED: and 225 front, even without a 5mm spacer, 225 fits perfectly. if you want the same look, go 225 and drop to a 2-3mm spacer.

or at least go hard and do 205 all around or something ridiculous lol.. i've seen 205's on a 10" or 11" rim, it's so stupid and unsafe :P
Appreciate 0
      08-23-2012, 07:52 AM   #9
Sylon
Brigadier General
Sylon's Avatar
United_States
60
Rep
3,413
Posts

 
Drives: 2011 135i, SG/CR, 6MT, M-Sport
Join Date: Apr 2010
Location: Michigan / Ohio

iTrader: (0)

Garage List
2011 135i  [4.60]
Quote:
Originally Posted by EuroTunerz5 View Post
Those are v713.... They were mine before

I'm glad someone pointed that out. Those are not v701's, I have v701's for reference (see sig).


Still looks good though, a bit low for my tastes, but glad you like it. I'm still trying to justify getting coils because I only want a small drop.
__________________

2011 BMW 135i | Space Gray | ///M-Sport | BMW CCA #450291
Facebook / Instagram / YouTube / Twitter
Appreciate 0
      08-23-2012, 08:34 AM   #10
ken1137
Brigadier General
ken1137's Avatar
United_States
41
Rep
3,697
Posts

 
Drives: a slow 2009 e90 335i
Join Date: Jun 2011
Location: Chicago

iTrader: (7)

Garage List
2009 e90 335i  [3.20]
v710 & v713

Duh! I see the difference now Still looks good.
__________________

BMWCCA member
Appreciate 0
      08-23-2012, 09:50 AM   #11
KEI7
First Lieutenant
KEI7's Avatar
United_States
6
Rep
330
Posts

 
Drives: 2012 135i coupe
Join Date: Jan 2012
Location: Chicago

iTrader: (0)

Quote:
Originally Posted by Sylon View Post
I'm glad someone pointed that out. Those are not v701's, I have v701's for reference (see sig).


Still looks good though, a bit low for my tastes, but glad you like it. I'm still trying to justify getting coils because I only want a small drop.

oh... i wonder how i got messed up mixing up 701 and 713...

Yes and they ARE 713s

Maybe cuz 701s were under consideration as well... anyway loving these 713s for now


I thought about just the springs but i didnt like the ride of lowering springs (how they tend to get bumpy) only on my former car so i just thought why not go all the way with coilovers



Quote:
Originally Posted by flinchy View Post
i fit a 245 tire, identical setup, and you can easily EASILY fit a 255 and it's still stretching.

265 would be almost stretched even.

considering 245mm is 9.5 inches.. on a 9.5" wheel, and flush is around 10.5" tire (aka 265mm)

my 245's have a LOT of stretch, your 235's would be retarded... 255 still stretches on and easily fits inside the guard.

ED: and 225 front, even without a 5mm spacer, 225 fits perfectly. if you want the same look, go 225 and drop to a 2-3mm spacer.

or at least go hard and do 205 all around or something ridiculous lol.. i've seen 205's on a 10" or 11" rim, it's so stupid and unsafe :P
Hey thanks for the advice I dont wanna do the fenders
but still im a fan of stretched tires (not too much though) so if 225 and 245 will be okay i might try next time...




Quote:
Originally Posted by nik0123 View Post
wheels look good When you do your tyres next maybe run 245 I see you are running +45 in the rear offset, I dont know how you would go with a 255 in the rear without rubbing at that height.
yes 245 for rear. Chicago roads are harsh and tough so maybe next time could go with 245 for more safety


Quote:
Originally Posted by MteK View Post
Looks ok I guess. You gave up performance for looks
Yes you could say that.... i still like the way how they sit so


Quote:
Originally Posted by ken1137 View Post
Love the v701's...have them on my 335. Maybe paint the calipers to stand out more Cant believe you running like that in Chicago...you've got major cojones GL!
Cojones Yes on stock i definitely was going at higher speed in downtown but now Im more careful... I wonder if that could make me a safer driver in a sense...

I'm thinking about the calipers!! Maybe yellow or blue or red or something.


Quote:
Originally Posted by EuroTunerz5 View Post
Those tires run very large so a 235 in those looks like a 245.... Sizes can be deceiving on some tires.


Btw didn't I tell you no fender work needed with this set up

THanks for everything! yep, they are fitting perfectly!!!


Quote:
Originally Posted by 135Pats View Post
Gorgeous, the wheels themselves and the fitment. Really nice
Thanks!! I love them too
Appreciate 0
      08-23-2012, 10:12 AM   #12
Eyeman
Lieutenant Colonel
Eyeman's Avatar
18
Rep
1,687
Posts

 
Drives: 2008 135 blk, blk, step
Join Date: Jan 2009
Location: Atlanta, GA

iTrader: (0)

Garage List
Nice!! That's definitely low and stretched. If you plan possibly change the suspension a little I'd wait until you figure out what your final tires will be. I had my rear gap pretty good with 245/35/19 Hankook rears which rubbed even rolled. Then I switched to 255/30/19 Toyos which are extremely short and now I don't rub at all but my gap is large and doesn't look as good.

It doesn't look to me like you need the front spacer. As you probably know, watch out when you change tire brands, it can make a big difference when you are that low/close to rubbing.
__________________
BSM, Blk leather, 30%tint, Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, Nitto 555 225/35fr PSS 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, rearseat removal, iCarbon diffuser and front lip, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille
Appreciate 0
      08-23-2012, 07:58 PM   #13
VMRWheels
Lieutenant General
VMRWheels's Avatar
259
Rep
16,017
Posts

 
Drives: BMW
Join Date: Jun 2007
Location: Anaheim, CA

iTrader: (4)

Garage List
2014 BMW F22  [0.00]
2013 BMW F06  [0.00]
2013 BMW F30  [0.00]
Nice stance, +45 offsets are nice and aggressive on the 1-series.
__________________

VMR | Wheels - Mitch A. | p. 714-442-7916 extension 107 | e. Mitch@velocitymotoring.com | ** VMR Holiday Special! **
Appreciate 0
      08-23-2012, 09:49 PM   #14
EuroTunerz5
Captain
13
Rep
667
Posts

 
Drives: 2012 AW BMW 135i M-Sport PPK
Join Date: Apr 2012
Location: Wisconsin

iTrader: (6)

Quote:
Originally Posted by VMRWheels
Nice stance, +45 offsets are nice and aggressive on the 1-series.
I agree with VMR don't listen to the haters... It's your ride and it looks absolutely sick! Enjoy it
__________________
2012 BMW 135i M-Sport PPK AW with Black Boston Leather- SOLD
2010 Acura TSX V6 Tech BSM
2003 Corvette Z06 TR "Widebooty"
Appreciate 0
      08-24-2012, 10:04 AM   #15
KEI7
First Lieutenant
KEI7's Avatar
United_States
6
Rep
330
Posts

 
Drives: 2012 135i coupe
Join Date: Jan 2012
Location: Chicago

iTrader: (0)

Quote:
Originally Posted by VMRWheels View Post
Nice stance, +45 offsets are nice and aggressive on the 1-series.
Quote:
Originally Posted by EuroTunerz5 View Post
I agree with VMR don't listen to the haters... It's your ride and it looks absolutely sick! Enjoy it
Thanks !!

Quote:
Originally Posted by Eyeman View Post
Nice!! That's definitely low and stretched. If you plan possibly change the suspension a little I'd wait until you figure out what your final tires will be. I had my rear gap pretty good with 245/35/19 Hankook rears which rubbed even rolled. Then I switched to 255/30/19 Toyos which are extremely short and now I don't rub at all but my gap is large and doesn't look as good.

It doesn't look to me like you need the front spacer. As you probably know, watch out when you change tire brands, it can make a big difference when you are that low/close to rubbing.

Thanks for the input. I dont wanna go below 35 though, so maybe 245/35/19 will be the fine line for oncoming research i guess. Looks like I'm gonna have to do more study before tires start running thin

Front was not as flush as I wanted to be even at stock height, so I figured if lowered it would be worse, so I got myself 5mm spacers. Could have gone for 7 or 8mm. Again this might be different with other tire brands so wonder how thats gonna work out when I change tires.
Appreciate 0
      08-24-2012, 05:34 PM   #16
Eyeman
Lieutenant Colonel
Eyeman's Avatar
18
Rep
1,687
Posts

 
Drives: 2008 135 blk, blk, step
Join Date: Jan 2009
Location: Atlanta, GA

iTrader: (0)

Garage List
What brand tires are those? They look like they run fairly small and rounded to me. You look very close to rubbing in the front to me, I'd bet many brands of tires will rub in your current front size at that height. In the rear the same might happen, I rubbed with 245/35/19 Hankooks even after I was rolled. It just rubbed the inner liner and mainly with passengers or weight. Actually removing the rear seat fixed my rubbing..lol.
__________________
BSM, Blk leather, 30%tint, Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, Nitto 555 225/35fr PSS 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, rearseat removal, iCarbon diffuser and front lip, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille
Appreciate 0
      08-26-2012, 11:00 PM   #17
KEI7
First Lieutenant
KEI7's Avatar
United_States
6
Rep
330
Posts

 
Drives: 2012 135i coupe
Join Date: Jan 2012
Location: Chicago

iTrader: (0)

Quote:
Originally Posted by Eyeman View Post
What brand tires are those? They look like they run fairly small and rounded to me. You look very close to rubbing in the front to me, I'd bet many brands of tires will rub in your current front size at that height. In the rear the same might happen, I rubbed with 245/35/19 Hankooks even after I was rolled. It just rubbed the inner liner and mainly with passengers or weight. Actually removing the rear seat fixed my rubbing..lol.
These are Federal tires. Actually just today with full 3 passengers right rear rubbed on big bumps. Gonna see what i can do...

Fronts are no prob so far.
Appreciate 0
      08-29-2012, 05:38 PM   #18
PARTS@STBMW
PARTS@STBMW's Avatar
United_States
36
Rep
994
Posts

 
Drives: All Models
Join Date: Nov 2011
Location: Camarillo, CA

iTrader: (2)

Well done. Wheels look great!
__________________
Your online source for genuine OEM BMW parts, accessories, & lifestyle product
Send a PM or email mario@bmwpartspros.com for any parts inquiries
Customer Service Hours: M-F 8am-5pm PST
Appreciate 0
      08-31-2012, 06:48 PM   #19
KEI7
First Lieutenant
KEI7's Avatar
United_States
6
Rep
330
Posts

 
Drives: 2012 135i coupe
Join Date: Jan 2012
Location: Chicago

iTrader: (0)

Quote:
Originally Posted by PARTS@STBMW View Post
Well done. Wheels look great!
Thank you!!
Appreciate 0
      08-31-2012, 07:54 PM   #20
EuroTunerz5
Captain
13
Rep
667
Posts

 
Drives: 2012 AW BMW 135i M-Sport PPK
Join Date: Apr 2012
Location: Wisconsin

iTrader: (6)

If its rubbing it probably just the inner liner on the inside. You are absolutely slammed!!! I set my koni yellow to 75% in the rear and no more rub a dub dub on my 255's
__________________
2012 BMW 135i M-Sport PPK AW with Black Boston Leather- SOLD
2010 Acura TSX V6 Tech BSM
2003 Corvette Z06 TR "Widebooty"
Appreciate 0
      08-31-2012, 08:23 PM   #21
KEI7
First Lieutenant
KEI7's Avatar
United_States
6
Rep
330
Posts

 
Drives: 2012 135i coupe
Join Date: Jan 2012
Location: Chicago

iTrader: (0)

Quote:
Originally Posted by EuroTunerz5 View Post
If its rubbing it probably just the inner liner on the inside. You are absolutely slammed!!! I set my koni yellow to 75% in the rear and no more rub a dub dub on my 255's
Yes I'm kind of checking to see where it is that's rubbing...
you haven't done anything to your fenders and no rubbing?
Appreciate 0
      09-04-2012, 12:12 AM   #22
ParkNuts
First Lieutenant
7
Rep
333
Posts

 
Drives: 2011 135i DCT
Join Date: Apr 2011
Location: Dallas

iTrader: (0)

Absolutely sick stance. I like that you have the BMW roundel centr caps in the wheels. It just doesn't look right otherwise. That kind of open spoke design screams for slotted rotors. It would really set off the look.

Well done and post up a moving shot if possible.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:17 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST