DIY- START/STOP Button Trim Swap

[firechicken99]

Originally Posted by Mr.Metak2you

Maybe I should have been more specific. 1/3 of the registered 1M forum members have purchased the orange ring.

That makes a bit more sense, and amen to that!

paypal incoming..

Actually i realized that you made perfect sense... I was being a dummy check your pms!

[Mr.Metak2you]

A couple more orders came in this week. Will ship out this coming Monday as usual. Thanks for ordering!

Originally Posted by PHANTOM

Thanks for the help. The clip at the end of my wire doesn't even come out of the hole entirely. Just in case what is the procedure if the wire does fall back into the dash? Obviously a tow to the dealership is not a viable option.

Originally Posted by ///M1

I can see your concerns, but to me it was not an issue. My harness wasn't very long either, but with care you should be fine. If you are still worried, just stuff some bounty paper napkins in the hole once you pull out the harness and that way it'll block it from accidentally falling through (yet it will be soft enough that it won't crimp the wires). The success rate of install on this mod is 100%, so with proper diligence you should be fine.

A few of you guys have shorter wires. In reality you really don't have to unplug the button. I have been able to remove the trim without unplugging by using my fingers and starting at the 10'o clock position then working onto the 2 then 4 and finally 8'o clock, that is where the tabs that hold the trim in place are located. Good luck!

[Mr.Metak2you]

All orders shipped out yesterday. Thanks Again!

Friendly reminder, I NEED a shipping address or I can not ship the trim. Some PayPal account users addresses are hidden or not available. So I need an email containing your shipping address sent to novisad242@yahoo.com Thanks.

[firechicken99]

Got mine!!! Thanks again dude!

[Mr.Metak2you]

Originally Posted by firechicken99

Got mine!!! Thanks again dude!

Great! Glad you like!



*All orders shipped out yesterday for last weeks orders. Should get them before the end of the week.

Thanks again for supporting this project!

[firechicken99]

Originally Posted by Mr.Metak2you

Great! Glad you like!



*All orders shipped out yesterday for last weeks orders. Should get them before the end of the week.

Thanks again for supporting this project!

Dude this project was a home run!!! I just wish I had had such luck with the fog lights Einser and I were trying to get made

[anstR]

hey man can i order one of these through you?

[Mr.Metak2you]

All orders shipped out today. Thanks for your support!

[amgthis]

Wow, awesome mod. A white trim piece with a blue LED would look sweet