2012 135i to 1M Body conversion - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

Tony135 · 09-12-2012, 04:50 PM

Hey guys, so my 135i has been a trooper. It's daily driven and has 30k (yes, 30) and it's a 2012. It's FBO with JB4, meth, intercooler, etc, plus it's lowered on ADV.1s, rear diffuser, wrapped matte black, and a few other mods.

Last weekend someone backed into my driver side rear quarter panel. It will definitely need to be replaced so I figured I might as well take advantage of this moment. I immediately brought my car to LT BMW and we're more than likely doing a full OEM 1M wide body. Along with that I'll be switching wheels to accommodate the wider fenders. I'll be going to ADV10 Deep concaves in 19x9.5 and 19x11. I will also be painting the stock brembos, but the color is not decided yet. And last but not least, I might be changing the color of the car. I'll paint it the same but might lose the matte black wrap for something else. I really fell in love with that red 1M.

This is my car as it stands now:

I hope to bring you guys some pictures of the whole process! Does anyone happen to know what exactly is involved in the front? Besides the obvious bumper, side skirts, fenders, etc. What else is needed? And any idea on cost of the front essentials? Thank!

Zombie1 · 09-12-2012, 04:56 PM

Thats a hot lil whip sir

take lots of pics of the work.

Zeros and ones · 09-12-2012, 05:50 PM

Glad you are having more luck with LTBMW than I am. Still have yet to receive a call back from them on the things I want to do to my car or try to get anyone free to help me with what I want to do cause you know... they are very busy.

Seems they will only work on cars that seems to be super popular. Oh well.

Can not wait till your project is complete. Be watching out for your progress.

Tony135 · 09-13-2012, 11:23 AM

Quote:

Originally Posted by Zeros and ones

Glad you are having more luck with LTBMW than I am. Still have yet to receive a call back from them on the things I want to do to my car or try to get anyone free to help me with what I want to do cause you know... they are very busy.

Seems they will only work on cars that seems to be super popular. Oh well.

Can not wait till your project is complete. Be watching out for your progress.

I haven't started too much, so I might get the same treatment as you. I just dropped it off last week and we're waiting for insurance to come by and check out the rear. Then I have to figure out what I'm paying for out of pocket. Hopefully you get your situation handled in a timely matter and so do I! I've heard nothing but great things.

Jetblack135 · 09-13-2012, 01:40 PM

cant wait till i see that! that will look amazing, not that your car doenst look amazing now

MaDoNiOn · 09-27-2012, 02:39 PM

Wow it looked good but its gona look amazing when its done!

Tony135 · 09-27-2012, 03:57 PM

Thanks! I'm excited. Going to cost a ton but it will look badass when done!

Venom · 09-27-2012, 04:45 PM

Please update us on cost and parts!

Tony135 · 09-27-2012, 05:50 PM

Front bumper: $439.90
Front Fenders: (2) $286.71
Side Skirts: (2) 197.80
Rear Quarter panels: (2) $678.83
Rear Bumper: Not sure yet but it's around $500.

Paint and labor is still being sorted out. Also has to be wrapped. The rear conversion with labor, paint, parts, and wrap (rear quarters/rear bumper) is coming out to $6,400.

Still have to do the front too, but the parts are ordered.

Venom · 09-29-2012, 10:29 AM

Quote:

Originally Posted by Tony135

Front bumper: $439.90
Front Fenders: (2) $286.71
Side Skirts: (2) 197.80
Rear Quarter panels: (2) $678.83
Rear Bumper: Not sure yet but it's around $500.

Paint and labor is still being sorted out. Also has to be wrapped. The rear conversion with labor, paint, parts, and wrap (rear quarters/rear bumper) is coming out to $6,400.

Still have to do the front too, but the parts are ordered.

thanks! I might do this next year.

Tony135 · 10-01-2012, 03:11 PM

Glad to help!

Also picking up all the front parts today and dropping off at LT tomorrow. Should have some pics of the process coming soon.

Venom · 10-01-2012, 03:13 PM

Sounds awesome! can't wait to see em!

Tony135 · 10-01-2012, 03:19 PM

Quote:

Originally Posted by Venom

Sounds awesome! can't wait to see em!

DAMN IT. I forgot I need to order mirrors too

Venom · 10-01-2012, 05:03 PM

Mirrors can't be THAT much more

Perfectus-D · 10-02-2012, 07:09 PM

Those are some badass pics! Like the scenery.

BMW86 · 10-02-2012, 08:37 PM

Quote:

Originally Posted by Tony135

Front bumper: $439.90
Front Fenders: (2) $286.71
Side Skirts: (2) 197.80
Rear Quarter panels: (2) $678.83
Rear Bumper: Not sure yet but it's around $500.

Paint and labor is still being sorted out. Also has to be wrapped. The rear conversion with labor, paint, parts, and wrap (rear quarters/rear bumper) is coming out to $6,400.

Still have to do the front too, but the parts are ordered.

Are these the costs for parts? Where are you sourcing them from?

Daft Auto · 10-03-2012, 01:54 PM

Quote:

Originally Posted by BMW86

Are these the costs for parts? Where are you sourcing them from?

THIS!

Tony135 · 10-04-2012, 10:57 AM

Quote:

Originally Posted by BMW86

Are these the costs for parts? Where are you sourcing them from?

Quote:

Originally Posted by HavidDasselhoff

THIS!

Sourcing the parts from my local BMW dealer. I believe they gave me a little bit of a deal, but they didn't tell me how much.

ilikebmxbikes · 10-04-2012, 12:09 PM

Quote:

Originally Posted by Tony135

Front bumper: $439.90
Front Fenders: (2) $286.71
Side Skirts: (2) 197.80
Rear Quarter panels: (2) $678.83
Rear Bumper: Not sure yet but it's around $500.

Paint and labor is still being sorted out. Also has to be wrapped. The rear conversion with labor, paint, parts, and wrap (rear quarters/rear bumper) is coming out to $6,400.

Still have to do the front too, but the parts are ordered.

What dealer is it? those prices are really good. I just ordered some M3 fitment wheels and will be widening the rear of my car (front is already ER). If the prices are really that affordable for the 1M parts, I may have to just pull the trigger and re-do the front end as well. The 1M fenders and quarterpanels have different edges around the wheel wells. The 1M is wheel well edge is considerably thinner, which is why I wouldnt just do a 1M front. Your car is going to look awesome finished.

Stohlen · 10-04-2012, 12:31 PM

Quote:

Originally Posted by Tony135

Front bumper: $439.90
Front Fenders: (2) $286.71
Side Skirts: (2) 197.80
Rear Quarter panels: (2) $678.83
Rear Bumper: Not sure yet but it's around $500.

Paint and labor is still being sorted out. Also has to be wrapped. The rear conversion with labor, paint, parts, and wrap (rear quarters/rear bumper) is coming out to $6,400.

Still have to do the front too, but the parts are ordered.

What about fender liners and such?

Tony135 · 10-04-2012, 12:38 PM

If you're widening the rear anyway and going to pay for the labor, you might as well go 1M. The parts aren't expensive but the labor is!

My local dealer is Rusnak BMW in Westlake Village. And thanks! I'm hoping it looks good. We'll be debuting some new wheels on it hopefully at SEMA

ilikebmxbikes · 10-04-2012, 12:54 PM

Quote:

Originally Posted by Tony135

If you're widening the rear anyway and going to pay for the labor, you might as well go 1M. The parts aren't expensive but the labor is!

My local dealer is Rusnak BMW in Westlake Village. And thanks! I'm hoping it looks good. We'll be debuting some new wheels on it hopefully at SEMA

awesome man. stoked you are going through with th is. I will reach out to Rusnak and get a price for the whole kit.

to the above poster who asked about fender liners, I have 1m fender liners in my ER widebody kit - The fenders were about $130ish for the set. The 1M liners share the back section with the M3 and just have a 1M specific front piece (part that includes the vent for the second radiator and oil cooler)

09-12-2012, 04:50 PM	#1
Tony135 Major Drives: 2012 BMW 135i Join Date: May 2011 Location: SoCal Posts: 1,034 iTrader: (0)	2012 135i to 1M Body conversion Hey guys, so my 135i has been a trooper. It's daily driven and has 30k (yes, 30) and it's a 2012. It's FBO with JB4, meth, intercooler, etc, plus it's lowered on ADV.1s, rear diffuser, wrapped matte black, and a few other mods. Last weekend someone backed into my driver side rear quarter panel. It will definitely need to be replaced so I figured I might as well take advantage of this moment. I immediately brought my car to LT BMW and we're more than likely doing a full OEM 1M wide body. Along with that I'll be switching wheels to accommodate the wider fenders. I'll be going to ADV10 Deep concaves in 19x9.5 and 19x11. I will also be painting the stock brembos, but the color is not decided yet. And last but not least, I might be changing the color of the car. I'll paint it the same but might lose the matte black wrap for something else. I really fell in love with that red 1M. This is my car as it stands now: I hope to bring you guys some pictures of the whole process! Does anyone happen to know what exactly is involved in the front? Besides the obvious bumper, side skirts, fenders, etc. What else is needed? And any idea on cost of the front essentials? Thank!
	Tweet

09-12-2012, 04:56 PM	#2
Zombie1 Lieutenant Drives: BMW 135i 2010 Join Date: Jul 2012 Location: New York Posts: 586 iTrader: (0)	So jealous Thats a hot lil whip sir take lots of pics of the work. __________________ Mods: rieger rear black performance grills Lci blacklines Berk exhaust alpina B3 flash and plenty more to follow

09-12-2012, 05:50 PM	#3
Zeros and ones Second Lieutenant Drives: 128i MT6 M Sport, Dinan 5 Join Date: Dec 2010 Location: US Posts: 276 iTrader: (1) Garage List 2011 128i [2.83] 2000 Dinan 5 [0.00]	Glad you are having more luck with LTBMW than I am. Still have yet to receive a call back from them on the things I want to do to my car or try to get anyone free to help me with what I want to do cause you know... they are very busy. Seems they will only work on cars that seems to be super popular. Oh well. Can not wait till your project is complete. Be watching out for your progress. __________________ "Nobody makes me bleed my own blood. NOBODY!!!!!"

09-13-2012, 01:40 PM	#5
Jetblack135 Second Lieutenant Drives: Jet black 135i Join Date: Jul 2012 Location: Cali Posts: 277 iTrader: (0)	cant wait till i see that! that will look amazing, not that your car doenst look amazing now __________________ \|'08 Jet Black 135i \| CCW Classics 18x9et 35 18x10.5 et 44 \| Vis Carbon Fiber GTR Hood \| Icarbon CSL trunk \| Quad Carbon Fiber Diffuser \| Full Custom Quad Exhaust\| OEM LCI Blacklines \| Alpine Hid Kit 6000k \| GodSpeed \|

09-27-2012, 02:39 PM	#6
MaDoNiOn Second Lieutenant Drives: Polo Tdi 1.9 Join Date: Aug 2012 Location: SouthAfrica Posts: 255 iTrader: (0) Garage List 2004 Polo Tdi 1.9 [4.00]	Wow it looked good but its gona look amazing when its done! __________________ Wishlist... Bmw 135i Convertable White...

09-27-2012, 03:57 PM	#7
Tony135 Major Drives: 2012 BMW 135i Join Date: May 2011 Location: SoCal Posts: 1,034 iTrader: (0)	Thanks! I'm excited. Going to cost a ton but it will look badass when done!

09-27-2012, 04:45 PM	#8
Venom Major Drives: Teg DC2 + E82 135i Join Date: May 2011 Location: Easy Bay, CA Posts: 1,463 iTrader: (3) Garage List 2008 BMW 135i [4.25]	Please update us on cost and parts! __________________ - Thanks MGallop! Widebody 135i Powered by: Wagner-Tuning & VMR Wheels TheSt\|G - "And if you think the 1M got the N54 for any reason other than to keep it slower/cheaper than the M3 you are delusional."

09-27-2012, 05:50 PM	#9
Tony135 Major Drives: 2012 BMW 135i Join Date: May 2011 Location: SoCal Posts: 1,034 iTrader: (0)	Front bumper: $439.90 Front Fenders: (2) $286.71 Side Skirts: (2) 197.80 Rear Quarter panels: (2) $678.83 Rear Bumper: Not sure yet but it's around $500. Paint and labor is still being sorted out. Also has to be wrapped. The rear conversion with labor, paint, parts, and wrap (rear quarters/rear bumper) is coming out to $6,400. Still have to do the front too, but the parts are ordered.

10-01-2012, 03:11 PM	#11
Tony135 Major Drives: 2012 BMW 135i Join Date: May 2011 Location: SoCal Posts: 1,034 iTrader: (0)	Glad to help! Also picking up all the front parts today and dropping off at LT tomorrow. Should have some pics of the process coming soon.

10-01-2012, 03:13 PM	#12
Venom Major Drives: Teg DC2 + E82 135i Join Date: May 2011 Location: Easy Bay, CA Posts: 1,463 iTrader: (3) Garage List 2008 BMW 135i [4.25]	Sounds awesome! can't wait to see em! __________________ - Thanks MGallop! Widebody 135i Powered by: Wagner-Tuning & VMR Wheels TheSt\|G - "And if you think the 1M got the N54 for any reason other than to keep it slower/cheaper than the M3 you are delusional."

10-01-2012, 05:03 PM	#14
Venom Major Drives: Teg DC2 + E82 135i Join Date: May 2011 Location: Easy Bay, CA Posts: 1,463 iTrader: (3) Garage List 2008 BMW 135i [4.25]	Mirrors can't be THAT much more __________________ - Thanks MGallop! Widebody 135i Powered by: Wagner-Tuning & VMR Wheels TheSt\|G - "And if you think the 1M got the N54 for any reason other than to keep it slower/cheaper than the M3 you are delusional."

10-02-2012, 07:09 PM	#15
Perfectus-D Perfectus Detail Drives: Bmw Join Date: Mar 2012 Location: The Woodlands, TX Posts: 18 iTrader: (0)	Those are some badass pics! Like the scenery.

10-04-2012, 12:38 PM	#21
Tony135 Major Drives: 2012 BMW 135i Join Date: May 2011 Location: SoCal Posts: 1,034 iTrader: (0)	If you're widening the rear anyway and going to pay for the labor, you might as well go 1M. The parts aren't expensive but the labor is! My local dealer is Rusnak BMW in Westlake Village. And thanks! I'm hoping it looks good. We'll be debuting some new wheels on it hopefully at SEMA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search