OFFICIAL Wheel/Tire Fitment Thread - What has already been done to 1ers - Page 18 - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

evilstib · 11-16-2012, 08:31 AM

Quote:

Originally Posted by bee_afraid

I'm gonna go for a 245/40/17 +40 square setup running a Sumitomo HTZIII tire. I need to get an alignment soon anyways so I'll just pull as much camber in the front as possible without plates.

Anyone see any issues?

You'll have to fender pull in the rear and will have to use camber plates in the front.

I just started a thread to try and run 17 X 8.5 ET40 concave arc 8s...it would be work to get them to fit...read the thread if you want Apex's words on what's required.

HeelToe · 11-17-2012, 06:07 PM

Wheels: Forgestar CF5 18x8.5 ET45 Front and Back
Tires: Michelin Super Sport 235/40-18 Front 245/35-18 Rear
Suspension mods: BMW Performance springs, Eibach sway bars, Dinan fixed offset camber plates
No Rubbing

SGM <3 · 11-20-2012, 09:56 PM

Hello there,

Instead of posting a new thread regarding wheel setup, I thought I'd ask here. Firstly my goal is to sit as low as I can. I will be running ST coilovers and Vorschlag camber plates.

I am putting an order in (sooner or later) to get some custom wheels made. So my plan is to run 18x8.5 in the front and a 18x10 in the back. I want to get the most possible lip on my back wheels, and I was wondering what sort of offset I'd want to run in order to achieve this. I am happy to roll/pull my fenders to get the right fit.

Any help is welcomed, thanks!

John_01 · 11-20-2012, 10:51 PM

Maybe its better to post a new thread for questions then show your details here when you have it sorted... I thought that's the purpose of this thread, ie. "What has BEEN done".

SGM <3 · 11-21-2012, 02:27 AM

Quote:

Originally Posted by John_01

Maybe its better to post a new thread for questions then show your details here when you have it sorted... I thought that's the purpose of this thread, ie. "What has BEEN done".

Ah my bad, just didn't want to add to the mess that is constant 'will these wheels fit' threads.

Will definitely post up here when I sort them out, sorry again!

ecyrbSLC · 11-25-2012, 11:02 PM

Quote:

Originally Posted by Everfly

CCWs wrap with potenza RE760 sit on H&R super sport lower springs
18x8.5 ET 45mm 235/40/18
18x10.5 ET 51mm 265/35/18
Front perfect no rub
Rear slightly rub over big bump, just rolled fenders and perfect

Fantastic set up...very very well done! What front lip are you running?

Cheers!

b1aze · 12-18-2012, 09:13 AM

Just picked up a set of Alufelgen CS7s in the 8/9" wide fitments and want to know if 235 wide front tires will fit? It is between the Z1 Star Specs and the RE-11s as these will be mainly AutoX wheels/tires.

18x8 ET45
18X9 ET48

Will go with either 225/40 or 235/40 fronts and 265/35 275/35 rears

oaks88 · 12-20-2012, 10:54 PM

will rial salerno fit 135? sizes are 225/45/17

///Chase · 12-28-2012, 04:30 AM

Quote:

Originally Posted by ecyrbSLC

Fantastic set up...very very well done! What front lip are you running?

Cheers!

its the Kershcer CF front lip.

sebaflex · 01-20-2013, 08:31 AM

bump for more setups

Simon930 · 01-20-2013, 02:08 PM

Set of Alufelgen sf71's in 19's.

Sorry for the iphone pics .

Let me know what you think

b1aze · 01-20-2013, 04:51 PM

The fronts are more concave than the rears...

///Chase · 01-23-2013, 07:44 AM

Quote:

Originally Posted by b1aze

The fronts are more concave than the rears...

they look like e90 offset to me, i have 1series offset SF-71s and front has good concave.. not that much

Rockstar1487 · 01-27-2013, 11:26 AM

has anyone actually ordered their rims from tire rack? if so did you order the TPMS with it or reuse the factory ones? if you ordered the TPMS from tire rack was there any problems with the TPMS light coming on inside the vehicle?

geared · 01-27-2013, 05:50 PM

CCW Classics
High Polished Lip, Barrel, and Bolts
Rare Brushed and Anodized Grey Face
Full Swiss, no center caps
Front: 18x8.5 et38
Rear: 18x10 et50

Michelin Pilot Super Sports
Front: 225/40/R18
Rear: 255/35/R18

KW V1

Rubs very slightly over bumps on the passenger side. The Michelin PSS tend to run wide, and are attributing to the issue. I will be slightly rolling the fenders which should resolve the issue, and allow me to go slightly lower in f and r.

One for fun:

Ginger_Extract · 01-31-2013, 11:24 PM

I don't suppose by any happy chance that a stock suspension/stock fenders 135i could fit 17x8 +20 with a 215/50 Blizzak without poke? My guess is that the offset is too low.

Edit: Just saw a 1'er on 17x8+40, the offset is too low on the +20's. Damn.

5teN · 02-01-2013, 02:11 AM

Tire, Winter 225/45R-17 Bridgestone Blizzak LM-60 OD 25.0", 835 rev/mile
Wheel, Winter 17x8" +40 Sparco Pista

Tire, Front, Summer 255/35-18 Dunlop Star Spec OD 25.0", 836 rev/mile
Tire, Rear, Summer 275/35-18 Dunlop Star Spec OD 25.6", 815 rev/mile

Wheel, Summer, F Forgestar F14 18x8.5 et45
Wheel, Summer, R Forgestar F14 18x9.5 et62

Eibach Pro Ki Springs
Koni Yellow's
Camber Plates

Some rub but fenders not rolled (yet)

lots of grip, quite balanced!

ripper0306 · 02-01-2013, 08:18 AM

Quote:

Originally Posted by Simon930

Set of Alufelgen sf71's in 19's.

Sorry for the iphone pics .

Let me know what you think

Setup (everything) ??
I have the M-sport suspension
I want those wheels so bad !

Simon930 · 02-01-2013, 08:21 AM

Quote:

Originally Posted by ripper0306

Setup (everything) ??
I have the M-sport suspension
I want those wheels so bad !

Sf71's 19's in 3 series offsets
215/35 235/35

ripper0306 · 02-01-2013, 09:42 AM

3 series offsets ? why ?
Are you lowered or something ?

b1aze · 02-01-2013, 01:55 PM

Quote:

Originally Posted by ripper0306

3 series offsets ? why ?
Are you lowered or something ?

Herra frush yo

Twhill19 · 02-01-2013, 05:25 PM

Anyone have a good DEEP DISH setup on a 135? in black with chrome lip or all black?

11-17-2012, 06:07 PM	#376
HeelToe Captain Drives: Rapidly from A to B Join Date: Jun 2005 Location: Illinois Posts: 771 iTrader: (1) Garage List 2006 330i [5.00] 2013 BMW 135is [0.00] 2000 323Ci [0.00]	Wheels: Forgestar CF5 18x8.5 ET45 Front and Back Tires: Michelin Super Sport 235/40-18 Front 245/35-18 Rear Suspension mods: BMW Performance springs, Eibach sway bars, Dinan fixed offset camber plates No Rubbing Attached Images

01-27-2013, 11:26 AM	#388
Rockstar1487 Private Drives: '08 135i Coupe Join Date: Jan 2013 Location: Central, New Jersey Posts: 71 iTrader: (0)	has anyone actually ordered their rims from tire rack? if so did you order the TPMS with it or reuse the factory ones? if you ordered the TPMS from tire rack was there any problems with the TPMS light coming on inside the vehicle? __________________ Was ist die fragen?

02-01-2013, 02:11 AM	#391
5teN Private Drives: 2008 135i Join Date: Nov 2011 Location: Vancouver Posts: 56 iTrader: (0) Garage List 1972 Datsun 510 (sold) [0.00] 2002 Subaru WRX (sold) [0.00] 2008 BMW 135i [0.00]	Tire, Winter 225/45R-17 Bridgestone Blizzak LM-60 OD 25.0", 835 rev/mile Wheel, Winter 17x8" +40 Sparco Pista Tire, Front, Summer 255/35-18 Dunlop Star Spec OD 25.0", 836 rev/mile Tire, Rear, Summer 275/35-18 Dunlop Star Spec OD 25.6", 815 rev/mile Wheel, Summer, F Forgestar F14 18x8.5 et45 Wheel, Summer, R Forgestar F14 18x9.5 et62 Eibach Pro Ki Springs Koni Yellow's Camber Plates Some rub but fenders not rolled (yet) lots of grip, quite balanced! Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-20-2012, 09:56 PM	#377
SGM <3 Internet Famous Drives: '09 SGM 135i Join Date: Nov 2012 Location: Kirkland, WA. Posts: 206 iTrader: (0)	Hello there, Instead of posting a new thread regarding wheel setup, I thought I'd ask here. Firstly my goal is to sit as low as I can. I will be running ST coilovers and Vorschlag camber plates. I am putting an order in (sooner or later) to get some custom wheels made. So my plan is to run 18x8.5 in the front and a 18x10 in the back. I want to get the most possible lip on my back wheels, and I was wondering what sort of offset I'd want to run in order to achieve this. I am happy to roll/pull my fenders to get the right fit. Any help is welcomed, thanks!

11-20-2012, 10:51 PM	#378
John_01 Lieutenant Colonel Drives: E90 325i, E82 135i Join Date: Mar 2009 Location: Sydney, Australia Posts: 1,710 iTrader: (0)	Maybe its better to post a new thread for questions then show your details here when you have it sorted... I thought that's the purpose of this thread, ie. "What has BEEN done".

12-18-2012, 09:13 AM	#381
b1aze Through detox Drives: 2010 135i Join Date: Aug 2012 Location: Marlborough, MA Posts: 1,119 iTrader: (13)	Just picked up a set of Alufelgen CS7s in the 8/9" wide fitments and want to know if 235 wide front tires will fit? It is between the Z1 Star Specs and the RE-11s as these will be mainly AutoX wheels/tires. 18x8 ET45 18X9 ET48 Will go with either 225/40 or 235/40 fronts and 265/35 275/35 rears

12-20-2012, 10:54 PM	#382
oaks88 Private First Class Drives: 2007 e90 335 Join Date: Oct 2011 Location: Glen Ellyn Posts: 129 iTrader: (0) Garage List 2007 BMW 335I E90 [0.00]	will rial salerno fit 135? sizes are 225/45/17

01-20-2013, 08:31 AM	#384
sebaflex Private First Class Drives: E36 M3 Join Date: Feb 2008 Location: San Juan PR Posts: 173 iTrader: (0)	bump for more setups

01-20-2013, 02:08 PM	#385
Simon930 Second Lieutenant Drives: FBO 135i Auto Join Date: Sep 2010 Location: South Florida Posts: 276 iTrader: (0)	Set of Alufelgen sf71's in 19's. Sorry for the iphone pics . Let me know what you think

01-20-2013, 04:51 PM	#386
b1aze Through detox Drives: 2010 135i Join Date: Aug 2012 Location: Marlborough, MA Posts: 1,119 iTrader: (13)	The fronts are more concave than the rears...

01-27-2013, 05:50 PM	#389
geared Lieutenant Drives: No car Join Date: Apr 2012 Location: jupiter, fl Posts: 433 iTrader: (1)	CCW Classics High Polished Lip, Barrel, and Bolts Rare Brushed and Anodized Grey Face Full Swiss, no center caps Front: 18x8.5 et38 Rear: 18x10 et50 Michelin Pilot Super Sports Front: 225/40/R18 Rear: 255/35/R18 KW V1 Rubs very slightly over bumps on the passenger side. The Michelin PSS tend to run wide, and are attributing to the issue. I will be slightly rolling the fenders which should resolve the issue, and allow me to go slightly lower in f and r. One for fun:

01-31-2013, 11:24 PM	#390
Ginger_Extract California-bound Drives: BMW 135i Join Date: Jan 2013 Location: Ohio Posts: 71 iTrader: (0)	I don't suppose by any happy chance that a stock suspension/stock fenders 135i could fit 17x8 +20 with a 215/50 Blizzak without poke? My guess is that the offset is too low. Edit: Just saw a 1'er on 17x8+40, the offset is too low on the +20's. Damn.

02-01-2013, 09:42 AM	#394
ripper0306 Private First Class Drives: BMW 135i MY08 - SGM Join Date: Apr 2012 Location: French Riviera (South of France) Posts: 173 iTrader: (0)	3 series offsets ? why ? Are you lowered or something ?

02-01-2013, 05:25 PM	#396
Twhill19 hungry Drives: 2012 135i N55 Join Date: May 2012 Location: Boston, MA Posts: 503 iTrader: (0)	Anyone have a good DEEP DISH setup on a 135? in black with chrome lip or all black?