BBS LM's on 135i. Would it fit?

aren · 09-09-2012, 03:26 AM

Looking to get LM's on my 135i. Found a set I want and talked to the guy and he said his girlfriend has a 128i and the wheels fit perfectly and don't rub. I told him my car was on H&R Super Sport Springs and he said so is his girl friends 128.

The sizes are
front 19 x 8.5 et.32
rear 19 x 10 et. 25

Is it true? Would they fit?

Wescuddles · 09-11-2012, 10:15 PM

lol he's a liar

Eddie135 · 09-11-2012, 10:21 PM

Those offsets, you will need a major front & rear fender roll.

Would fit a 1M not a 135.

milehigh135i · 09-12-2012, 10:30 PM

Those would need more than a roll more like a major fender pull. I have LM reps 18x8.5f/9.5r with +45f/+48r offset and they barely fit perfect with 225/255 tires. I'm going to try to squeeze 235/265 tires on in a few months. Ask the guy if you can put one on your car and see how ridiculous it looks. If you want LM reps contact BavarianX on the forum

bogart · 09-17-2012, 02:18 PM

Heck no. I have LM's.

18x9 et 35
18x10 et 50

They barely fit. Needed suspension and lots of fender work to get them to fit.

t02t · 09-20-2012, 02:39 PM

they "fit" you'll be rubbing in the rear and there's pretty much nothing you can do about it without spending way too much money. my fronts are et35 and in the rear with a 10mm i was running 19x9.5 +23

MS135I · 09-23-2012, 11:37 AM

I have real BBS LM's that were originally 19x8.5 and 19x9.5 et 32. The back pads were shaved down with the offset now at et 37. I am running dunlop direzzas 225/35s and 245/35s. Even with some negative camber dialed in along with rolled and pulled rear fenders, it still rubs a bit on dips and turns, although the car does sit pretty low with a little tuck in the rear.

1LazyBmw · 09-23-2012, 01:26 PM

Quote:

Originally Posted by MS135I

I have real BBS LM's that were originally 19x8.5 and 19x9.5 et 32. The back pads were shaved down with the offset now at et 37. I am running dunlop direzzas 225/35s and 245/35s. Even with some negative camber dialed in along with rolled and pulled rear fenders, it still rubs a bit on dips and turns, although the car does sit pretty low with a little tuck in the rear.

Might want to share some pictures

KEI7 · 09-24-2012, 10:55 AM

Quote:

Originally Posted by 1LazyBmw

Might want to share some pictures

+1 !!

bogart · 09-25-2012, 11:07 AM

Name: 540293_10100612304693438_1113335599_n.jpg
Views: 3106
Size: 110.4 KB

Name: 289963_10100651063849778_549478302_o.jpg
Views: 1743
Size: 124.0 KB

Name: 461761_455830741112927_1559174014_o.jpg
Views: 2284
Size: 173.7 KB

Name: 463784_414376041925064_583965944_o.jpg
Views: 1605
Size: 65.2 KB

MS135I · 09-25-2012, 06:17 PM

Don't have any good pictures of my car yet, but will definitely post some as soon as I take a few.

Bogart's sick ride above should give you a good idea. The only difference is that my wheels are 19's.

FLOSS did the great custom work on my wheels, and also did Bogart's as well I believe.

Dietr · 11-05-2012, 01:37 PM

It's not my thing for a 1'er

bogart · 11-09-2012, 12:06 PM

First person I've ever heard that from.

Tee-Dub · 11-09-2012, 04:06 PM

Quote:

Originally Posted by milehigh135i

Those would need more than a roll more like a major fender pull. I have LM reps 18x8.5f/9.5r with +45f/+48r offset and they barely fit perfect with 225/255 tires. I'm going to try to squeeze 235/265 tires on in a few months. Ask the guy if you can put one on your car and see how ridiculous it looks. If you want LM reps contact BavarianX on the forum

Those BavX reps look pretty good, hows fitment though on sport suspension? I don't want to stretch tires or roll fenders.

Ammonia · 11-09-2012, 07:48 PM

OP never replied back lol he probably hadoukened the seller and then got sent to jail

Rukuss · 11-10-2012, 12:24 PM

Quote:

Originally Posted by bogart

First person I've ever heard that from.

Bogart your car is just crazy bad!!!

I can't say enough about it, and the grey 1er with the black hood is realy nice too, big props to both of you

Ammonia · 11-10-2012, 12:29 PM

Quote:

Originally Posted by Rukuss

Bogart your car is just crazy bad!!!

I can't say enough about it, and the grey 1er with the black hood is realy nice too, big props to both of you

The grey one is his before he wrapped it in the blue

Tee-Dub · 11-10-2012, 09:04 PM

LM's are so classic BMW, too bad they're so ungodly expensive!

Rukuss · 11-10-2012, 09:08 PM

Quote:

Originally Posted by Tee-Dub

LM's are so classic BMW, too bad they're so ungodly expensive!

The price is not to bad for what they are though

milehigh135i · 11-28-2012, 03:07 AM

Quote:

Originally Posted by Tee-Dub

Those BavX reps look pretty good, hows fitment though on sport suspension? I don't want to stretch tires or roll fenders.

On sport suspension you'll be fine. I'm running bmwp suspension and dont rub with 225/255 combo.

09-09-2012, 03:26 AM	#1
aren Second Lieutenant Drives: 2008 BMW 135i Join Date: Jan 2012 Location: Glendale Posts: 236 iTrader: (1)	BBS LM's on 135i. Would it fit? Looking to get LM's on my 135i. Found a set I want and talked to the guy and he said his girlfriend has a 128i and the wheels fit perfectly and don't rub. I told him my car was on H&R Super Sport Springs and he said so is his girl friends 128. The sizes are front 19 x 8.5 et.32 rear 19 x 10 et. 25 Is it true? Would they fit?
	0 Tweet

09-11-2012, 10:15 PM	#2
Wescuddles Captain Drives: bsm 135i Join Date: Apr 2012 Location: Vancouver Posts: 606 iTrader: (0)	lol he's a liar __________________ BSM 2008 135i -VRSF 7" IC -VRSF DP's -n55 mids -BERK race -ER CP -TIAL BOV -BMS DCI -JB4 G5 ISO -ST coils -STOPTECH slotted rotors & pads -SLeK lip Follow me on instagram: wescuddles
	0

09-17-2012, 02:18 PM	#5
bogart Lieutenant Colonel Drives: E82 N55 DCT Join Date: Nov 2010 Location: STL, MO Posts: 1,641 iTrader: (4) Garage List 2011 BMW 135i [3.53]	Heck no. I have LM's. 18x9 et 35 18x10 et 50 They barely fit. Needed suspension and lots of fender work to get them to fit. __________________
	0

09-20-2012, 02:39 PM	#6
t02t First Lieutenant Drives: 135i Join Date: Jan 2011 Location: Richmond/LA Posts: 390 iTrader: (4)	they "fit" you'll be rubbing in the rear and there's pretty much nothing you can do about it without spending way too much money. my fronts are et35 and in the rear with a 10mm i was running 19x9.5 +23 __________________ Build thread
	0

09-25-2012, 11:07 AM	#10
bogart Lieutenant Colonel Drives: E82 N55 DCT Join Date: Nov 2010 Location: STL, MO Posts: 1,641 iTrader: (4) Garage List 2011 BMW 135i [3.53]	__________________
	0

09-11-2012, 10:21 PM	#3
Eddie135 N55 Commando Drives: 135i - DCT - N55 Join Date: Jul 2011 Location: Melbourne Posts: 738 iTrader: (0)	Those offsets, you will need a major front & rear fender roll. Would fit a 1M not a 135.
	0

09-12-2012, 10:30 PM	#4
milehigh135i Private First Class Drives: 2010 135i Join Date: Nov 2010 Location: Denver Posts: 92 iTrader: (1)	Those would need more than a roll more like a major fender pull. I have LM reps 18x8.5f/9.5r with +45f/+48r offset and they barely fit perfect with 225/255 tires. I'm going to try to squeeze 235/265 tires on in a few months. Ask the guy if you can put one on your car and see how ridiculous it looks. If you want LM reps contact BavarianX on the forum
	0

09-23-2012, 11:37 AM	#7
MS135I Private First Class Drives: M-sport 328i Join Date: Nov 2010 Location: Encino, CA Posts: 121 iTrader: (0)	I have real BBS LM's that were originally 19x8.5 and 19x9.5 et 32. The back pads were shaved down with the offset now at et 37. I am running dunlop direzzas 225/35s and 245/35s. Even with some negative camber dialed in along with rolled and pulled rear fenders, it still rubs a bit on dips and turns, although the car does sit pretty low with a little tuck in the rear.
	0

09-25-2012, 06:17 PM	#11
MS135I Private First Class Drives: M-sport 328i Join Date: Nov 2010 Location: Encino, CA Posts: 121 iTrader: (0)	Don't have any good pictures of my car yet, but will definitely post some as soon as I take a few. Bogart's sick ride above should give you a good idea. The only difference is that my wheels are 19's. FLOSS did the great custom work on my wheels, and also did Bogart's as well I believe.
	0

11-05-2012, 01:37 PM	#12
Dietr New Member Drives: [E82] 120d Join Date: Nov 2012 Location: Belgium Posts: 15 iTrader: (0) Garage List 2009 BMW e82 [0.00]	It's not my thing for a 1'er
	0

11-09-2012, 12:06 PM	#13
bogart Lieutenant Colonel Drives: E82 N55 DCT Join Date: Nov 2010 Location: STL, MO Posts: 1,641 iTrader: (4) Garage List 2011 BMW 135i [3.53]	First person I've ever heard that from. __________________
	0

11-09-2012, 07:48 PM	#15
Ammonia Captain Drives: n54 135i Join Date: Mar 2012 Location: Fayetteville, NC Posts: 740 iTrader: (4)	OP never replied back lol he probably hadoukened the seller and then got sent to jail __________________ Mods: JB4 \| Berk Race Axel-Back \| VSRF DPs \| BMS DCI \| CM Meth + CMGS Controller \| Stett CP \| Tial BOV \| RR Scoops \| BMS LED AE \| Matte Grills \| 10% Tint \| M Pedals \| Blackline LCI \| CSR Eyelids \| Amber Overlays \| Rear OEM Flaps \| Seibon GTR Hood \| Painted Spoiler \| H-Style Front Lip \| VMR V701s
	0

11-10-2012, 09:04 PM	#18
Tee-Dub Captain Drives: 2008 135i Join Date: May 2009 Location: Vancouver, WA Posts: 753 iTrader: (9)	LM's are so classic BMW, too bad they're so ungodly expensive!
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search