BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      11-10-2012, 03:27 PM   #1
gors32
New Member
 
Drives: 116i
Join Date: Feb 2011
Location: Croatia

Posts: 6
iTrader: (0)

E87 engine swap

Hi, I am planning to swap my E87 116i to S65 engine. I saw E82 conversion on this forum but i could't get much information from him. I would like to know how will work interior dash (would like to update to M3 one if possible, because I also read that M3 dash can be recoded to any engine, but what if I put s65 into 116 chassis??), what about DTC, ABS, and other ancillaries like power windows, Air con (I have manual one installed), radio etc?? will that work if I only order plug&play kit from KMS electronic or such similar standalone ECU? I know that engine fits right in, tranny too, but differential must be from M3. Does it fit to e87 116 subframe mounts?, or should I buy whole rear subframe with diff, sway bar, sway links and other stuff?? Probably drive shaft will be custom work right? because m3 is longer car,so original one will not fit, especially if diff is not from m3 because joint is different on M3 diffs than on other diffs..
Fuel pump must be transplated also, but with its own computer that is in the right side of trunk.
Anything else to worry about? I know that engine will fit in with no problem and that anything else will be custom work to fit (AC pipes, water pipes, radiator, tanks, exhaust etc).
gors32 is offline  
0
Reply With Quote
      11-13-2012, 03:16 AM   #2
gors32
New Member
 
Drives: 116i
Join Date: Feb 2011
Location: Croatia

Posts: 6
iTrader: (0)

Nobody knows?
gors32 is offline  
0
Reply With Quote
      11-29-2013, 11:02 AM   #3
kennman
New Member
 
Drives: 120d M sport
Join Date: Jun 2012
Location: EUROPE

Posts: 9
iTrader: (0)

Quote:
Originally Posted by gors32 View Post
Hi, I am planning to swap my E87 116i to S65 engine. I saw E82 conversion on this forum but i could't get much information from him. I would like to know how will work interior dash (would like to update to M3 one if possible, because I also read that M3 dash can be recoded to any engine, but what if I put s65 into 116 chassis??), what about DTC, ABS, and other ancillaries like power windows, Air con (I have manual one installed), radio etc?? will that work if I only order plug&play kit from KMS electronic or such similar standalone ECU? I know that engine fits right in, tranny too, but differential must be from M3. Does it fit to e87 116 subframe mounts?, or should I buy whole rear subframe with diff, sway bar, sway links and other stuff?? Probably drive shaft will be custom work right? because m3 is longer car,so original one will not fit, especially if diff is not from m3 because joint is different on M3 diffs than on other diffs..
Fuel pump must be transplated also, but with its own computer that is in the right side of trunk.
Anything else to worry about? I know that engine will fit in with no problem and that anything else will be custom work to fit (AC pipes, water pipes, radiator, tanks, exhaust etc).
bok Gors! Ako zelis, daj mi mail, da podiskutiramo o swapu. Pozdrav
Igor iz Slovenije
kennman is offline  
0
Reply With Quote
      12-01-2013, 10:51 PM   #4
livnpaintball2
Private First Class
 
Drives: E82 N54
Join Date: Mar 2013
Location: Dfw

Posts: 120
iTrader: (0)

Go to one of the coding websites, not much of that here.
livnpaintball2 is offline  
0
Reply With Quote
      12-01-2013, 11:58 PM   #5
ilikebmxbikes
Colonel
 
ilikebmxbikes's Avatar
 
Drives: '08 135i
Join Date: Apr 2011
Location: San Francisco

Posts: 2,618
iTrader: (32)

Quote:
Originally Posted by gors32
Nobody knows?
A lot is bolt up but it isn't a simple swap.

I have a swap en route and will be tackling this over the next few months. I will post my part numbers and findings once everything starts.

To answer a few or your questions:

-We are using an m3 gauge cluster w/ m3 dme

-we are using an m3 rear subframe and diff with a custom driveshaft

- AC will work with modifying the m3 ac condensor

- we are doing a 6 speed swap as it is simpler electronically than adding a DCT
__________________
MY Build Log
08 AW 135i | Cobb | ETS FMIC | ER CP w/ Tial Bov | AR Catted Downpipes | Berk Mids | Meisterschaft GT SUS 1M |M3 Control Arms | M3 Sways | M3 Rear Subframe Bushings | Wavetrac LSD | AST 4200 DA Coilovers | HRE R43 | Hankook R-S3 |Full BMW Performance Interior | Revozport 1M Raze Aero Package in Satin Carbon |1M Body Conversion|
ilikebmxbikes is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:37 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST