E92 M3 Rear Subframe + Diff upgrade - Page 3 - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

pavo335 · 10-16-2012, 01:41 AM

Quote:

Originally Posted by BMW86

This is a great mod, think I'll go down this route when something pops up online although I already have a Wavetrac which I'm very happy with. It should make a huge difference. I wonder how the m3 diff works with the DSC/DTC though.

Pete's got it and not had an issue. Mind you he has done about 50 k's since so....... Kinda like being married to Miranda and just looking at it

BMW86 · 10-16-2012, 02:54 AM

Quote:

Originally Posted by pavo335

Pete's got it and not had an issue. Mind you he has done about 50 k's since so....... Kinda like being married to Miranda and just looking at it

Garage queen

RimasRS · 10-16-2012, 03:32 AM

What about E-diff and M3 diff together will it cause any problems?

TimMc · 10-16-2012, 03:46 AM

Quote:

Originally Posted by RimasRS

What about E-diff and M3 diff together will it cause any problems?

Why would it? If the M3 LSD does it's job the E-diff won't get activated.

RimasRS · 10-16-2012, 04:20 AM

Quote:

Originally Posted by TimMc

Why would it? If the M3 LSD does it's job the E-diff won't get activated.

Well maybe and I hope you are right...

Another interesting question from where our speedometer reads from gearbox from Diff or from the wheels? If the signal comes from diff then it is another problem as it will read higher.

pavo335 · 10-16-2012, 04:22 AM

Pete tells me speedo not an issue.

skycat · 10-16-2012, 04:35 AM

Quote:

Originally Posted by RimasRS

Well maybe and I hope you are right...

Another interesting question from where our speedometer reads from gearbox from Diff or from the wheels? If the signal comes from diff then it is another problem as it will read higher.

Been there done this, there is no problem at all, speedo runs from the ABS sensors, the car runs and drives fine 100% better than the stock CRAP set up

RimasRS · 10-16-2012, 04:42 AM

Quote:

Originally Posted by skycat

Been there done this, there is no problem at all, speedo runs from the ABS sensors, the car runs and drives fine 100% better than the stock CRAP set up

Thanks great to know that.

Do you know if I would go stock subframe route will it still be fine?

skycat · 10-16-2012, 04:42 AM

Quote:

Originally Posted by BMW86

Garage queen

No just to many toys and no time, But i did put rego on the E92 and gave it a clean sorry its no QUEEN, as its been sitting for 3 months. But with summer on the way its now HARLEY time

BMW86 · 10-16-2012, 05:54 AM

Quote:

Originally Posted by skycat

No just to many toys and no time, But i did put rego on the E92 and gave it a clean sorry its no QUEEN, as its been sitting for 3 months. But with summer on the way its now HARLEY time

Good to see the 335i getting some love. Can never have too many toys either

kb135 · 10-16-2012, 09:22 AM

whoa great thread!

I have read it all, but just want to confirm: if I put in an E9x M3 diff, I will also need the half-shafts right? But I could still use my existing 135i driveshaft?

Anyone have any contacts for an E9x M3 diff? I wanted a wavetrac but can't seem to source one at a reasonable price, or they just wont ship.

Drawn05 · 10-16-2012, 03:38 PM

Quote:

Originally Posted by kb135

whoa great thread!

I have read it all, but just want to confirm: if I put in an E9x M3 diff, I will also need the half-shafts right? But I could still use my existing 135i driveshaft?

Anyone have any contacts for an E9x M3 diff? I wanted a wavetrac but can't seem to source one at a reasonable price, or they just wont ship.

You need a M3 drive shaft as well as the M3 half shafts.

I got mine off ebay.de and am having it shipped to me. Have tried to find one in Australia and although there are M3 wrecks around, no-one will sell the rear subframe on its own or for less than $4,000.

Drawn05 · 11-15-2012, 07:56 PM

Never use DB schenker for ANYTHING!! They are the worst company I have ever come across.

I could list the reasons why they are so terrible but it just makes me sad.

pavo335 · 11-15-2012, 08:08 PM

whats up steve?

Drawn05 · 11-15-2012, 09:00 PM

Quote:

Originally Posted by pavo335

whats up steve?

Just dont use DB Schenker. Terrible company!

I have had to nag them for the last fortnight to get them to organise the final delivery address and date. Customers just shouldn’t have to do this. It is quite evident that the culture at that place is one of complacency and they have no interest in delivering a better service to their clients.

Finally organised it for Monday. Was hoping for today so I could go and have a look but that was too much to ask.

BMW86 · 11-15-2012, 09:37 PM

Quote:

Originally Posted by Drawn05

Just dont use DB Schenker. Terrible company!

I have had to nag them for the last fortnight to get them to organise the final delivery address and date. Customers just shouldn’t have to do this. It is quite evident that the culture at that place is one of complacency and they have no interest in delivering a better service to their clients.

Finally organised it for Monday. Was hoping for today so I could go and have a look but that was too much to ask.

DB Shenker is ratshit. Worst freight company I've dealt with as well. Did the sting you with extra fees too?

MrBlonde · 11-16-2012, 12:57 AM

I've said it before and I'll say it again: DB Shenker are ratshit and I'll never use them again for any reason. Liars and thieves.

Drawn05 · 11-16-2012, 01:28 AM

I didnt have much choice. If I did I would have asked for anything but them. Charged me an an extra $400 in dubious fees but, and this is what really pissed me off, after paying them they couldn't be arsed giving me any information about the delivery.

Anyway, its finally here on Monday and hopefully in good order.

Drawn05 · 11-19-2012, 12:30 AM

Well, it turned up today and its all good. The initial shipping was €300, customs /aqis fees were $500ish with db raping my wallet for $400ish in bs charges.

Nigelo · 11-25-2012, 05:19 PM

Hey guys!

Im in the process of the same thing. but for the e92 335i. Got an absolute stonking deal on a 99.8% complete M3 subframe and suspension.

Im going to be attempting to install the ENTIRE subframe, but with different rear springs (to match the eibach ones in the front of my 335i). I just need some of the perches, rubber mounts, covers for the springs and shocks.

Other little things that I've found out are that if you cant find a M3 propshaft, one of the older e38 / e39 v8 (not M5) ones should match up (although the pre-installed bolts need hammer out and e92 M3 ones fitted).

Since im putting in the whole frame but keeping the 335i rear brakes I will need to use a custom toe arm, but all the other arms fit.

Hope some of that info is useful across the models?

RimasRS · 11-26-2012, 03:17 AM

Quote:

Originally Posted by Nigelo

Hey guys!

Im in the process of the same thing. but for the e92 335i. Got an absolute stonking deal on a 99.8% complete M3 subframe and suspension.

Im going to be attempting to install the ENTIRE subframe, but with different rear springs (to match the eibach ones in the front of my 335i). I just need some of the perches, rubber mounts, covers for the springs and shocks.

Other little things that I've found out are that if you cant find a M3 propshaft, one of the older e38 / e39 v8 (not M5) ones should match up (although the pre-installed bolts need hammer out and e92 M3 ones fitted).

Since im putting in the whole frame but keeping the 335i rear brakes I will need to use a custom toe arm, but all the other arms fit.

Hope some of that info is useful across the models?

If you will be able add some photos of the installation process.

RimasRS · 11-29-2012, 06:33 AM

Any updates?

11-16-2012, 12:57 AM	#61
MrBlonde Welcome! To the House of Batiatus! Drives: 368 M Coupe, E82 135i, E70 X5 Join Date: Jan 2008 Location: Sydney Posts: 2,581 iTrader: (0)	I've said it before and I'll say it again: DB Shenker are ratshit and I'll never use them again for any reason. Liars and thieves. __________________ .-=[ Kenny ]=-. 1999 BMW M Coupe 10.775 @ 134.35 mph w/1.600 60' (Best 136.07 mph) 25th August 2004. +2010 X5 35D+ Check out the 1Addicts Drag Racing Standings and Drag Racing 101.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-16-2012, 03:32 AM	#47
RimasRS Lieutenant Colonel Drives: 135i MT 2009 AW Join Date: Sep 2010 Location: Europe Posts: 1,679 iTrader: (0)	What about E-diff and M3 diff together will it cause any problems?

10-16-2012, 04:22 AM	#50
pavo335 Banned Drives: 3.5 wheeler Join Date: Feb 2012 Location: sydney Posts: 2,993 iTrader: (0)	Pete tells me speedo not an issue.

10-16-2012, 09:22 AM	#55
kb135 Private First Class Drives: 135i Alpine white Join Date: Dec 2011 Location: Brisbane, Australia Posts: 100 iTrader: (0) Garage List 2008 BMW 135i [4.00]	whoa great thread! I have read it all, but just want to confirm: if I put in an E9x M3 diff, I will also need the half-shafts right? But I could still use my existing 135i driveshaft? Anyone have any contacts for an E9x M3 diff? I wanted a wavetrac but can't seem to source one at a reasonable price, or they just wont ship.

11-15-2012, 07:56 PM	#57
Drawn05 Captain Drives: Yes Join Date: Dec 2010 Location: Left Posts: 707 iTrader: (0)	Never use DB schenker for ANYTHING!! They are the worst company I have ever come across. I could list the reasons why they are so terrible but it just makes me sad.

11-15-2012, 08:08 PM	#58
pavo335 Banned Drives: 3.5 wheeler Join Date: Feb 2012 Location: sydney Posts: 2,993 iTrader: (0)	whats up steve?

11-16-2012, 01:28 AM	#62
Drawn05 Captain Drives: Yes Join Date: Dec 2010 Location: Left Posts: 707 iTrader: (0)	I didnt have much choice. If I did I would have asked for anything but them. Charged me an an extra $400 in dubious fees but, and this is what really pissed me off, after paying them they couldn't be arsed giving me any information about the delivery. Anyway, its finally here on Monday and hopefully in good order.

11-19-2012, 12:30 AM	#63
Drawn05 Captain Drives: Yes Join Date: Dec 2010 Location: Left Posts: 707 iTrader: (0)	Well, it turned up today and its all good. The initial shipping was €300, customs /aqis fees were $500ish with db raping my wallet for $400ish in bs charges.

11-25-2012, 05:19 PM	#64
Nigelo Lieutenant Drives: E92 335i se Join Date: Aug 2011 Location: Northern Ireland Posts: 459 iTrader: (1)	Hey guys! Im in the process of the same thing. but for the e92 335i. Got an absolute stonking deal on a 99.8% complete M3 subframe and suspension. Im going to be attempting to install the ENTIRE subframe, but with different rear springs (to match the eibach ones in the front of my 335i). I just need some of the perches, rubber mounts, covers for the springs and shocks. Other little things that I've found out are that if you cant find a M3 propshaft, one of the older e38 / e39 v8 (not M5) ones should match up (although the pre-installed bolts need hammer out and e92 M3 ones fitted). Since im putting in the whole frame but keeping the 335i rear brakes I will need to use a custom toe arm, but all the other arms fit. Hope some of that info is useful across the models?

11-29-2012, 06:33 AM	#66
RimasRS Lieutenant Colonel Drives: 135i MT 2009 AW Join Date: Sep 2010 Location: Europe Posts: 1,679 iTrader: (0)	Any updates?