19x8.5 et35 and 19x9.5 et35 on 135i??

Simon930 · 01-12-2013, 10:15 AM

I'm looking to get some wheels in 19x8.5 et35 and 19x9.5 et35 and will probably be running 225/35/19 front and 245/35/19 rear.

Do you think this will fit with rolling all 4 corners??

I am also running BC extreme Drop coilovers..

Post any comments or your inputs

Thanks..

b1aze · 01-12-2013, 11:25 AM

Will not fit easily at all. Lots of front camber and a narrower tire in the rear and maybe they will fit without rubbing.

Simon930 · 01-12-2013, 11:46 AM

I would do go as low as 215/35/19 front and 235/35/19 rear and roll all 4 corners. Would that work ?

cooler2442 · 01-12-2013, 12:04 PM

Depends how low you are. I'm running ET37 19x8.5 front and ET38 19x10.5 rear. I rub in the rear with 265/30's but no rubbing in the front with 215/35's. I had to raise my rear, add negative camber, and roll it. Still rubbing.

Simon930 · 01-12-2013, 12:31 PM

Quote:

Originally Posted by cooler2442

Depends how low you are. I'm running ET37 19x8.5 front and ET38 19x10.5 rear. I rub in the rear with 265/30's but no rubbing in the front with 215/35's. I had to raise my rear, add negative camber, and roll it. Still rubbing.

If your running 19x10.5 et38 rear with a 265 I don't see why I can't run a 19x9.5 et35 with a 245/35 or 235/35 . I'll probably go with 215/35 in the front.

What do you think?

Thanks for all the feedback
Really appreciate it

cooler2442 · 01-12-2013, 12:53 PM

Quote:

Originally Posted by Simon930

If your running 19x10.5 et38 rear with a 265 I don't see why I can't run a 19x9.5 et35 with a 245/35 or 235/35 . I'll probably go with 215/35 in the front.

What do you think?

Thanks for all the feedback
Really appreciate it

All I have to say is good luck. Everyone's car is different. I sold some Forgestar rims that my car had with 265/35's on the rears and I didn't rub at all. Person who bought them rubbed and he was on stock suspension when I was lowered.

No one will be able to tell you 100% until you try it.

Simon930 · 01-12-2013, 12:54 PM

Quote:

Originally Posted by cooler2442

All I have to say is good luck. Everyone's car is different. I sold some Forgestar rims that my car had with 265/35's on the rears and I didn't rub at all. Person who bought them rubbed and he was on stock suspension when I was lowered.

No one will be able to tell you 100% until you try it.

Alright thanks man

I think I'm going to go with 215/35 front and 235/35 rear

PurpleHeart135 · 01-12-2013, 10:10 PM

You wouldn't happen to be looking at the SSR euro type-f's would you? I noticed that is the offset they offer in the 19's as well and was wondering the same.

I think, however, have someone make you a wheel is the best bet to get an aggressive look which is what I assume you're looking for on the bc's.

Let us now how the 35 offset works out, im curious.

Simon930 · 01-12-2013, 11:57 PM

Quote:

Originally Posted by PurpleHeart135

You wouldn't happen to be looking at the SSR euro type-f's would you? I noticed that is the offset they offer in the 19's as well and was wondering the same.

I think, however, have someone make you a wheel is the best bet to get an aggressive look which is what I assume you're looking for on the bc's.

Let us now how the 35 offset works out, im curious.

I'm looking into a different set of wheels

I will definetly post pictures up after I'm done

Tee-Dub · 01-13-2013, 12:38 AM

What is the point of "making it work" just to end up running such skinny tires?

Seems counter productive to performance.

Simon930 · 01-13-2013, 12:48 AM

Quote:

Originally Posted by Tee-Dub

What is the point of "making it work" just to end up running such skinny tires?

Seems counter productive to performance.

I didn't ask about performance
I like aggressive wheel setups

)

Simon930 · 01-16-2013, 10:47 AM

just put the wheels last night heres a couple pics:
photoshoot coming soon

JuL' · 01-16-2013, 04:15 PM

not ugly !!!
the tyre rubs in the wings ?

Simon930 · 01-16-2013, 05:27 PM

Quote:

Originally Posted by JuL'

not ugly !!!
the tyre rubs in the wings ?

No rub

135IS · 01-16-2013, 05:54 PM

more pictures? the rear wheel looks kinda akward

b1aze · 01-16-2013, 06:16 PM

That's....ummm.... aggressive? I guess?

b1aze · 01-19-2013, 08:32 PM

That's a tragedy...

Simon930 · 01-20-2013, 09:58 AM

Quote:

Originally Posted by KartelForged

Those are very nice fitments for the one. now is you go lower you are going to dial in camber i had a set of those on my 2011 135i and i was super slammed and i rubbed like hell in the rear with the same set up you had, maybe you remember seeing this car i had to dial in a few degrees of camber tho, to make this work ,

Looks awesome

What size,offsets,tires are you running and how much camber dialed ?

MS135I · 01-20-2013, 02:52 PM

Looks good. Are the rear fenders rolled at all?

Simon930 · 01-20-2013, 02:57 PM

Quote:

Originally Posted by MS135I

Looks good. Are the rear fenders rolled at all?

Yes they are rolled aggressively

Stohlen · 01-20-2013, 03:32 PM

What is the purpose of going FBO and then putting this kind of a tire setup on the car?

Simon930 · 01-20-2013, 03:40 PM

Quote:

Originally Posted by Stohlen

What is the purpose of going FBO and then putting this kind of a tire setup on the car?

This doesn't effect my performance in a str8 line

01-12-2013, 10:15 AM	#1
Simon930 First Lieutenant 28 Rep 300 Posts Drives: FBO 135i Auto Join Date: Sep 2010 Location: South Florida iTrader: (0)	19x8.5 et35 and 19x9.5 et35 on 135i?? I'm looking to get some wheels in 19x8.5 et35 and 19x9.5 et35 and will probably be running 225/35/19 front and 245/35/19 rear. Do you think this will fit with rolling all 4 corners?? I am also running BC extreme Drop coilovers.. Post any comments or your inputs Thanks..
	Appreciate 0 Tweet Quote

01-12-2013, 11:25 AM	#2
b1aze Just one more taste... 32 Rep 1,419 Posts Drives: 2010 135i Join Date: Aug 2012 Location: Shirley, MA iTrader: (14)	Will not fit easily at all. Lots of front camber and a narrower tire in the rear and maybe they will fit without rubbing.
	Appreciate 0 Quote

01-12-2013, 11:46 AM	#3
Simon930 First Lieutenant 28 Rep 300 Posts Drives: FBO 135i Auto Join Date: Sep 2010 Location: South Florida iTrader: (0)	I would do go as low as 215/35/19 front and 235/35/19 rear and roll all 4 corners. Would that work ?
	Appreciate 0 Quote

01-12-2013, 12:04 PM	#4
cooler2442 Brigadier General 148 Rep 3,825 Posts Drives: '11 135 Sport DCT Join Date: Apr 2011 Location: The Valley, Los Angeles iTrader: (6)	Depends how low you are. I'm running ET37 19x8.5 front and ET38 19x10.5 rear. I rub in the rear with 265/30's but no rubbing in the front with 215/35's. I had to raise my rear, add negative camber, and roll it. Still rubbing. __________________
	Appreciate 0 Quote

01-12-2013, 10:10 PM	#8
PurpleHeart135 Private 1 Rep 83 Posts Drives: 2009 135i Join Date: Jan 2013 Location: NY iTrader: (1)	You wouldn't happen to be looking at the SSR euro type-f's would you? I noticed that is the offset they offer in the 19's as well and was wondering the same. I think, however, have someone make you a wheel is the best bet to get an aggressive look which is what I assume you're looking for on the bc's. Let us now how the 35 offset works out, im curious.
	Appreciate 0 Quote

01-13-2013, 12:38 AM	#10
Tee-Dub Captain 23 Rep 753 Posts Drives: 2008 135i Join Date: May 2009 Location: Vancouver, WA iTrader: (9)	What is the point of "making it work" just to end up running such skinny tires? Seems counter productive to performance.
	Appreciate 0 Quote

01-16-2013, 10:47 AM	#12
Simon930 First Lieutenant 28 Rep 300 Posts Drives: FBO 135i Auto Join Date: Sep 2010 Location: South Florida iTrader: (0)	just put the wheels last night heres a couple pics: photoshoot coming soon
	Appreciate 0 Quote

01-16-2013, 04:15 PM	#13
JuL' Enlisted Member 0 Rep 48 Posts Drives: 123d e82 upgrade Join Date: Oct 2012 Location: france iTrader: (0)	not ugly !!! the tyre rubs in the wings ? __________________ 123D E82 Ecu remap, no dfp, intercooler, ///M3 e93 arms, recaro pole position, pro race 1.2 wheels, carbone fiber ...
	Appreciate 0 Quote

01-16-2013, 05:54 PM	#15
135IS Captain 32 Rep 740 Posts Drives: 09 LMB 135I / AW 1M Join Date: Feb 2010 Location: t.o iTrader: (1) Garage List 2009 135i [3.50]	more pictures? the rear wheel looks kinda akward __________________ LMB 135i: Gone AW 1M: Current #211 of 220
	Appreciate 0 Quote

01-16-2013, 06:16 PM	#16
b1aze Just one more taste... 32 Rep 1,419 Posts Drives: 2010 135i Join Date: Aug 2012 Location: Shirley, MA iTrader: (14)	That's....ummm.... aggressive? I guess?
	Appreciate 0 Quote

01-19-2013, 08:32 PM	#17
b1aze Just one more taste... 32 Rep 1,419 Posts Drives: 2010 135i Join Date: Aug 2012 Location: Shirley, MA iTrader: (14)	That's a tragedy...
	Appreciate 0 Quote

01-20-2013, 02:52 PM	#19
MS135I Private First Class 7 Rep 132 Posts Drives: M-sport 328i Join Date: Nov 2010 Location: Encino, CA iTrader: (0)	Looks good. Are the rear fenders rolled at all?
	Appreciate 0 Quote

01-20-2013, 03:32 PM	#21
Stohlen Major 34 Rep 1,228 Posts Drives: AW 135i Join Date: Aug 2012 Location: Waterford, Mi iTrader: (2) Garage List 2008 BMW 135i [2.83]	What is the purpose of going FBO and then putting this kind of a tire setup on the car?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search