Performance Power Kit 2 Question - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

33914 · 04-21-2012, 06:22 PM

I realize dealer has to do programming, but has anyone installed the hardware (additional radiator, fan, etc) on their own? If so I'd appreciate knowing how the job was (fit, problems, etc.,), how long it took and any install tips. Thanks

peeti · 04-22-2012, 03:39 PM

There is a guy with a post on the performance mod section that talks about PPK just did that, he offered the PDF instructions via PM. best of luck!

Dackelone · 04-22-2012, 04:39 PM

Quote:

Originally Posted by peeti

There is a guy with a post on the performance mod section that talks about PPK just did that, he offered the PDF instructions via PM. best of luck!

Yea, Pig Farmer is his user name.

33914 · 04-22-2012, 05:26 PM

Thanks for the tip!

Pig Farmer · 04-22-2012, 08:17 PM

33914,
Sent you an email with the instructions.

Dack,
Thanks for all your help. Happy I can finally return the favor.

Regards,
Pig Farmer

BTW -- I'm logged on with an iPad and can't figure out how to cut and paste the pdf file containing the instructions from an email to a post. Anyone know how this can be accomplished? This may be good information to have on the site.

TimMc · 04-23-2012, 03:54 AM

I've just purchased the kit (less the tune) and will be fitting it myself, so would be interested on hearing about install tips as well. Unfortunately the kit does not come complete & you still need to order parts specific to your model. Additional parts I believe I need to order for my RHD '08 135i coupe include;
51742157684 Air duct (1)
11122163613 Auxiliary cable for Power Kit RHD (1)
67618370818 Rubber Mounting M6X10 (2)

Dackelone · 04-23-2012, 04:08 AM

Quote:

Originally Posted by Pig Farmer

33914,

...BTW -- I'm logged on with an iPad and can't figure out how to cut and paste the pdf file containing the instructions from an email to a post. Anyone know how this can be accomplished? This may be good information to have on the site.

You have to click on: "Go Advanced" (the button to the right of the "Quick Reply" at the bottom of the thread... Then you will see the menu tabs above where you write your text. CLICK on the "paper clip" tab, a new dialog box will open and you can upload any files (pics, pdf's, ect) to that post. After you attach the files, then click UPLOAD. IF you want you can place the "files" by clicking on the paper clip icon again within that post.

Hope that helps.

33914 · 05-02-2012, 05:36 PM

Against my better judgment, I ordered PPK 2, should be here Friday. My plan is to install hardware myself. Seller was nice enough to send me the instructions before I decided to purchase. Instructions make hardware install look pretty straight forward and like a fun project. However, it seems it might be somewhat challenging to do the job really well as, at least for me, it's hard tearing up a perfectly good new car. At this point, scariest part seems to be the 1 wire you have to "cut" in the ebox (it took me awhile to figure that out as instructions say "separate") and properly refilling radiator after you install the replacement hoses. If anyone's interested, I'll (after I get Seller's permission) send the instructions and I'll also try to make a short write up on the project.

TimMc · 05-03-2012, 05:07 AM

Quote:

Originally Posted by 33914

Against my better judgment, I ordered PPK 2, should be here Friday. My plan is to install hardware myself. Seller was nice enough to send me the instructions before I decided to purchase. Instructions make hardware install look pretty straight forward and like a fun project. However, it seems it might be somewhat challenging to do the job really well as, at least for me, it's hard tearing up a perfectly good new car. At this point, scariest part seems to be the 1 wire you have to "cut" in the ebox (it took me awhile to figure that out as instructions say "separate") and properly refilling radiator after you install the replacement hoses. If anyone's interested, I'll (after I get Seller's permission) send the instructions and I'll also try to make a short write up on the project.

Excellent. I'll be keen to read your write up before my extra parts arrive & I tackle this myself!

Eddie135 · 05-03-2012, 07:00 PM

What is actually included in the hardware?

Water cooler, air duct, auxillary cable....

Did I missed anything out?

Thanks.

Pig Farmer · 05-03-2012, 07:28 PM

Quote:

Originally Posted by Eddie135

What is actually included in the hardware?

Water cooler, air duct, auxillary cable....

Did I missed anything out?

Thanks.

It comes with the auxiliary radiator and related hoses and mounting bracket, an 850w fan to replace the 600w stock fan, a new fan relay and wiring harness, brackets to relocate the horns, new spark plugs, and the code for the software flash (which the dealer will need when recoding you ECU). The air ducts are sold separately since the PPK2 fits on multiple cars with different bumper styles. RHD vehicles require an additional wire harness.

Eddie135 · 05-03-2012, 09:28 PM

Quote:

Originally Posted by Pig Farmer

It comes with the auxiliary radiator and related hoses and mounting bracket, an 850w fan to replace the 600w stock fan, a new fan relay and wiring harness, brackets to relocate the horns, new spark plugs, and the code for the software flash (which the dealer will need when recoding you ECU). The air ducts are sold separately since the PPK2 fits on multiple cars with different bumper styles. RHD vehicles require an additional wire harness.

Jcp135 · 12-29-2012, 08:21 AM

Quote:

Originally Posted by Pig Farmer

33914,
Sent you an email with the instructions.

Dack,
Thanks for all your help. Happy I can finally return the favor.

Regards,
Pig Farmer

BTW -- I'm logged on with an iPad and can't figure out how to cut and paste the pdf file containing the instructions from an email to a post. Anyone know how this can be accomplished? This may be good information to have on the site.

Pig Farmer: I have been searching for your original thread but i can not found it. Can you please send me the instructions???? I have just buy the PPK2 in the US and planning to take all the way to Perú and do the instalation.
thanks.

Pig Farmer · 12-30-2012, 05:15 AM

Quote:

Originally Posted by Jcp135

Pig Farmer: I have been searching for your original thread but i can not found it. Can you please send me the instructions???? I have just buy the PPK2 in the US and planning to take all the way to Perú and do the instalation.
thanks.

PMed.

Da _Grk_Tuner · 01-18-2013, 11:35 PM

whats the point of ppk2 gains?

GaryS · 01-19-2013, 08:50 AM

Quote:

Originally Posted by Da _Grk_Tuner

whats the point of ppk2 gains?

It's for track, not drag racing.

Caleb · 01-30-2013, 05:29 PM

Here are the install docs for both stage 1 and stage 2.

Eddie135 · 01-30-2013, 05:34 PM

Just got mine PPK2 installed.

Definitely feels stronger than stock, more mid range and top-end power.

TS135i · 01-31-2013, 02:13 AM

Quote:

Originally Posted by Eddie135

Just got mine PPK2 installed.

Definitely feels stronger than stock, more mid range and top-end power.

Did you have any throttle lag issues prior to the install.

Eddie135 · 01-31-2013, 07:27 PM

Quote:

Originally Posted by TS135i

Did you have any throttle lag issues prior to the install.

Compared to stock, the lag is greatly reduced. Very responsive as soon as I step on the accelerator.

I have tested it on hot weather conditions with the PPK2, very minimal lag.

No heat soak issues or knock from the car. that is my personal opinion on my car, could be different on each individual.

04-21-2012, 06:22 PM	#1
33914 New Member Drives: 2011 135i convertible Join Date: Apr 2010 Location: SE Posts: 29 iTrader: (0)	Performance Power Kit 2 Question I realize dealer has to do programming, but has anyone installed the hardware (additional radiator, fan, etc) on their own? If so I'd appreciate knowing how the job was (fit, problems, etc.,), how long it took and any install tips. Thanks
	Tweet

05-03-2012, 07:00 PM	#10
Eddie135 N55 Commando Drives: 135i - DCT - N55 Join Date: Jul 2011 Location: Melbourne Posts: 618 iTrader: (0)	What is actually included in the hardware? Water cooler, air duct, auxillary cable.... Did I missed anything out? Thanks. __________________ PPK-Stage 2 \| BMW 313 Wheels \| BMW CF Spoiler \| BMW CF Mirror Caps \| BMW Y-Pipe \| BMW CF Diffuser \| Black LCI Tailights \| K&N Drop-In \| iCarbon CF Front Lip \| LUX V3 \| PIVOT-Raizin Voltage Stabilizer \|

01-30-2013, 05:34 PM	#18
Eddie135 N55 Commando Drives: 135i - DCT - N55 Join Date: Jul 2011 Location: Melbourne Posts: 618 iTrader: (0)	Just got mine PPK2 installed. Definitely feels stronger than stock, more mid range and top-end power. __________________ PPK-Stage 2 \| BMW 313 Wheels \| BMW CF Spoiler \| BMW CF Mirror Caps \| BMW Y-Pipe \| BMW CF Diffuser \| Black LCI Tailights \| K&N Drop-In \| iCarbon CF Front Lip \| LUX V3 \| PIVOT-Raizin Voltage Stabilizer \|

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-22-2012, 03:39 PM	#2
peeti Private First Class Drives: 2011 M3 e90 Join Date: Apr 2012 Location: Chicagoland Posts: 146 iTrader: (0)	There is a guy with a post on the performance mod section that talks about PPK just did that, he offered the PDF instructions via PM. best of luck!

04-22-2012, 05:26 PM	#4
33914 New Member Drives: 2011 135i convertible Join Date: Apr 2010 Location: SE Posts: 29 iTrader: (0)	Thanks for the tip!

04-22-2012, 08:17 PM	#5
Pig Farmer Lieutenant Drives: 2009 BMW 135i Join Date: May 2010 Location: Florida Posts: 488 iTrader: (0)	33914, Sent you an email with the instructions. Dack, Thanks for all your help. Happy I can finally return the favor. Regards, Pig Farmer BTW -- I'm logged on with an iPad and can't figure out how to cut and paste the pdf file containing the instructions from an email to a post. Anyone know how this can be accomplished? This may be good information to have on the site.

04-23-2012, 03:54 AM	#6
TimMc Lieutenant Colonel Drives: 135i SCT N54 Join Date: Aug 2008 Location: Brisbane, Australia Posts: 1,818 iTrader: (0)	I've just purchased the kit (less the tune) and will be fitting it myself, so would be interested on hearing about install tips as well. Unfortunately the kit does not come complete & you still need to order parts specific to your model. Additional parts I believe I need to order for my RHD '08 135i coupe include; 51742157684 Air duct (1) 11122163613 Auxiliary cable for Power Kit RHD (1) 67618370818 Rubber Mounting M6X10 (2)

05-02-2012, 05:36 PM	#8
33914 New Member Drives: 2011 135i convertible Join Date: Apr 2010 Location: SE Posts: 29 iTrader: (0)	Against my better judgment, I ordered PPK 2, should be here Friday. My plan is to install hardware myself. Seller was nice enough to send me the instructions before I decided to purchase. Instructions make hardware install look pretty straight forward and like a fun project. However, it seems it might be somewhat challenging to do the job really well as, at least for me, it's hard tearing up a perfectly good new car. At this point, scariest part seems to be the 1 wire you have to "cut" in the ebox (it took me awhile to figure that out as instructions say "separate") and properly refilling radiator after you install the replacement hoses. If anyone's interested, I'll (after I get Seller's permission) send the instructions and I'll also try to make a short write up on the project.

01-18-2013, 11:35 PM	#15
Da _Grk_Tuner YEAR ONE OF THE ONE Drives: 135i tii Join Date: Apr 2008 Location: New York Posts: 643 iTrader: (0)	whats the point of ppk2 gains?