For Sale in Oz

[Drawn05]

Originally Posted by tyrrellnick

Anyone got a set of OEM bmwp brakes for an e87?

I'm told the e82/88 will go straight on the front but require some minor tinkering on the rear.

The 130i doesn't need any tinkering to fit the brembo calipers, whether they are the stock 135i ones or BMWP ones.

http://www.realoem.com/bmw/showparts...82&hg=34&fg=95

As you can see here, the rear BMWP were an official option for the 130i so they will fit. The 130i and 135i axle carriers are the same size. The 125i and 120i are much smaller and would need modification for the hand brake to function.

[nasperated]

Cool. I'm happy with the stock OEM 135i brakes. Don't necessarily need the fancy ones.

[GJA003]

For sale.
BMW M-Sport Steering wheel.
2X Bridgestone potenza RFT 215/40/18 80%
2X Bridgestone potenza RFT 215/40/18 75%
(Decided im going non run flats and new rims)
Make an offer pictures available on request.

[PeteA]

For Sale :
BMW 135i OEM Exhaust - Used in a box - Barely used - seen about 180-190 kilometers (one hundred and eighty) use.

Have a vague idea of their worth, so pm me an offer.

Pickup in Melbourne South Eastern suburbs.

[oopy]

Not entirely true, the fronts will bolt straight on. The rears require you to upgrade to the 135i hub flanges, the alternative to this is to get the specific BMWP rear disc rotors which were also an option in some markets for the e9x series although i've read these are quite rare

Originally Posted by Drawn05

The 130i doesn't need any tinkering to fit the brembo calipers, whether they are the stock 135i ones or BMWP ones.

http://www.realoem.com/bmw/showparts...82&hg=34&fg=95

As you can see here, the rear BMWP were an official option for the 130i so they will fit. The 130i and 135i axle carriers are the same size. The 125i and 120i are much smaller and would need modification for the hand brake to function.

[Drawn05]

Originally Posted by oopy

Not entirely true, the fronts will bolt straight on. The rears require you to upgrade to the 135i hub flanges, the alternative to this is to get the specific BMWP rear disc rotors which were also an option in some markets for the e9x series although i've read these are quite rare

It is entirely true. I have a set installed on my 125i and I know what issues we ran into. The Perf. Calipers and rotors will fit up fine on the smaller 125i hub but the handbrake shoe diameter is only 160mm and cannot open wide enough to grip the larger diamater rotor. The 135i AND 130i both have a larger hub and a 185mm handbrake shoe diameter so have no issue.

http://www.realoem.com/bmw/select.do

Go do some research and get back to us.

[oopy]

Originally Posted by Drawn05

It is entirely true. I have a set installed on my 125i and I know what issues we ran into. The Perf. Calipers and rotors will fit up fine on the smaller 125i hub but the handbrake shoe diameter is only 160mm and cannot open wide enough to grip the larger diamater rotor. The 135i AND 130i both have a larger hub and a 185mm handbrake shoe diameter so have no issue.

http://www.realoem.com/bmw/select.do

Go do some research and get back to us.

I have, the e82 and e87 run different tracks.
To clear the rears on the 130i a switch to the e82 hub flanges are required.

This is why BMW specify different rotors for the rear of the 130i. The BMWP rotor for the 135i is a different part number to the 130i 324x22 rotor which is also used on specific e9x 3-series in certain regions.

The handbrake issue for the 130i to 135i shouldn't be a problem as they run the same parts.

[Justin@ADVAN Performance]

Originally Posted by Justin@ADVAN Performance

Hey guys,

I have a set of as new M3 aluminium rear traction arms and rear camber arms, that I no longer require (adjustable steel alloy Megan Racing arms installed).

The above is more commonly referred to as a "rear guide rod kit" and "rear upper link kit".

The complete set goes for around $750 USD, via HPAutowerks in the US BEFORE shipping charges are added.

I am looking for $595 FIRM please, the M3 arms are a nice complement to a rear subframe bush upgrade.

Direct fitment on 128i 130i 135i 135i 325i 328i 330i 335i vehicles.

The rear camber arms come complete with rear ABS & brake pad wear sensor fastening bracket.

Cheers,

Justin.

Hey guys,

M3 arms reduced to $595 FIRM, no low-ball offers please.

Cheers,

Justin.

[oopy]

Originally Posted by Justin@ADVAN Performance

Hey guys,

M3 arms reduced to $595 FIRM, no low-ball offers please.

Cheers,

Justin.

What's the postage cost like to get these over to Perth 6000 ?

[woosh]

For Sale:

Xbox 360 console in Black
250gb hard drive
One controller

3 games included...
Forza4
Call of Duty MW3
Fifa13 (unopened, stick in plastic wrapping)

Bought brand new in November 2012, with receipts for all of the above. Like new, only used a handful of times.

$250 pickup from Lower North Shore or Inner West, Sydney.

[Justin@ADVAN Performance]

Originally Posted by oopy

What's the postage cost like to get these over to Perth 6000 ?

Hey oopy,

PM sent.

Cheers,

Justin.

[nasperated]

Now I'm confused again about the upgrade from 130 brakes to 135. So the stock 135i brakes still have an issue going on the back of the e87, just not the handbrake issue that's been discussed earlier?

[Drawn05]

Originally Posted by tyrrellnick

Now I'm confused again about the upgrade from 130 brakes to 135. So the stock 135i brakes still have an issue going on the back of the e87, just not the handbrake issue that's been discussed earlier?

Your best option is to call up Peter@Advan and ask him what he knows on the subject.

[NoOg_sTaR]

I have a set of 4 front and rear 135i brake rotors. These came off the car when I upgraded the brakes, they are in okay condition so if somebody wants to have a short term fix for free please feel free to take them. I even have the stock pads with F: 40%, R:60% meat left - Free.

I am also selling a OEM 135i front sway bar with the bushes - $50.
OEM AW 135i lip spoiler - $50.
OEM rear mudguards - $20.

Located in WA.

[oopy]

Originally Posted by NoOg_sTaR

I have a set of 4 front and rear 135i brake rotors. These came off the car when I upgraded the brakes, they are in okay condition so if somebody wants to have a short term fix for free please feel free to take them. I even have the stock pads with F: 40%, R:60% meat left - Free.

I am also selling a OEM 135i front sway bar with the bushes - $50.
OEM AW 135i lip spoiler - $50.
OEM rear mudguards - $20.

Located in WA.

hey noog,

long time no see, didn't realise you've got a 135i now, but happy to take those rotors and pads off your hands

[oopy]

Originally Posted by tyrrellnick

Now I'm confused again about the upgrade from 130 brakes to 135. So the stock 135i brakes still have an issue going on the back of the e87, just not the handbrake issue that's been discussed earlier?

Someone has actually done an e87 130i upgrade from the 135i on another forum and ran into this issue, the part numbers for the rear hub flanges differ between the 2 and the variance in dimensions account for the difference between the rear tracks.

drawn05:
if i'm not mistaken you upgraded an e82 125i ?
the other e82's i believe run the same rear track and hence the same hub flanges (haven't confirmed this one - best to check on realoem) but run into the issue of different hand brake size/parts

[Liub]

Champs, anyone after a N55 AW 135 please let me know. No car sales ad yet just putting the feelers out.

[clfive02]

Yet to put on Carsales but gouging interest on here first. Up for sale is a 2012 118i Sport Line hatch.

- 10,000kms
- Mineral Grey
- Black Leather
- Sunroof
- 8 speed auto transmission
- Balance of new car warranty
- Free servicing (expires August 2013)

Price: $46,500

Located in Eastern Suburbs of Melbourne. Pics are too large to put on here, please PM with email address and I will send.

[Knightelf]

For sale:

BMS N55 intake, done about 3500 km
SOLD

261M wheels, with stock Bridgestone RFT - backs are nearly gone 20%, fronts about 50%
No gutter rash
$750

[18dim]

Anyone got an N54 intake, other than a DCI, they're looking to sell? Over my DCI and want something else. Another aftermarket boxed intake, or an Injen or similar is perfect.

[ericccccccc]

Looking to buy some parts for my 135i, both new or used

intake scoop
ETS OR HELIX FMIC
BERK MIDPIPE
LUX V3 angel eye
e82 Lci tail light
e82 front lip and carbon diffuser


thanks

[micha3l]

May as well post this up in here, my mum is selling her 120i convertible if anyone is looking.

2009 120i Convertible M-Sport
12,900kms
Alpine white
Steptronic
One owner
Showroom condition - Hardly driven!

SOLD