FORUMS
- 5
![]() |
|
|
![]() |
| 02-02-2013, 03:42 PM | #1 |
|
YEAR ONE OF THE ONE
|
afew shakes even though I've don't it all
hey guys I have replaced my fuel pump 2 times before hitting 25,000 miles also I had BMW change my spark plugs right before my warranty expired at 45,000 miles I also recently got walnut blasting on my car done by Helix at 46,000 miles and still sometimes when I'm at a red light I get a quick small shake and I see the rpm gauge moving a bit and then stops right away I get this once in a while even with the hpfp replaced twiced. changed spark plugs according to BMW and. walnut shell blast
any idea guys? |
|
|
|
| 02-02-2013, 05:51 PM | #5 | |
|
Moderator
Drives: 135i Silber mit/Rot 6MT N54 Join Date: Feb 2010
Location: Bayern, Germany
Posts: 13,327
iTrader: (0)
|
Quote:
Software. My car used to do that when new. My dealer changed the plugs/injectors/and spark plugs - and updated the SW when my car was brand new. I never had that problem again. I actually kind of miss it though. Then later when I got BMW anti-tuner SW update for the HPFP recall... that killed my throttle response and gave me that "lag SW" update. Personally I would just live with this - its really not causing any harm. BUT if it really bothers you - you could have bmw do a SW update and take your chances with the "lag SW". |
|
![]() |
|
| 02-02-2013, 05:51 PM | #6 | |
|
YEAR ONE OF THE ONE
|
Quote:
|
|
|
|
|
| 02-02-2013, 06:33 PM | #8 | |
|
YEAR ONE OF THE ONE
|
Quote:
|
|
|
|
|
| 02-02-2013, 07:02 PM | #9 | ||
|
YEAR ONE OF THE ONE
|
Quote:
|
||
|
|
|
| 02-05-2013, 02:18 AM | #10 |
|
Enlisted Member
![]() |
My car did the same thing,
It ended up being my valve cover gasket. Took it to BMW got it replaced plus the intake cleaned with the walnuts. Three days after I got it back I'm merging onto the a highway I hit about 4000 rpm in 3rd and the car goes into limp mode. Turns out after they replaced the gasket the "trained technicians" over tightened one of the bolts for the valve cover and a 2 inch crack formed right beside the bolt. FYI- 2 weeks before I discoverd the leak i had it in for an oil change, I guess they missed that one Gotta love BMW Take a good look around the engine for oil and look at the plastic cover that sits under the engine, If its not the problem you only wasted 5 mins if it is you may have saved alot of headache |
![]() |
|
| 02-05-2013, 12:36 PM | #11 |
|
Private
![]() |
I've got the same issue, car stutters under high load/low rpm or big throttle inputs, then SES light comes on. Runs very rough for a few minutes then power comes back and SES light goes off. Does not happen every time I do a pull. 53,300 miles on the car. Accessport logged it as a misfire in cylinder 3. It has just had the plugs replaced and along with an injector or two (will have to find out which ones; written on paperwork at home). Car is out of warranty now other than the extensions offered under HPFP and turbos. I don't think the injector recall applies to this year car, but the local dealership has already replaced at least one injector under warranty so I'm wondering if that is the problem or a symptom of something else such as carbon buildup. Harumph. I really cant justify installing a new FMIC until this gets sussed out...
Last edited by Walter_Sobchak; 02-05-2013 at 12:56 PM. |
|
|
|
| 02-05-2013, 12:52 PM | #12 |
|
Moderator
Drives: 135i Silber mit/Rot 6MT N54 Join Date: Feb 2010
Location: Bayern, Germany
Posts: 13,327
iTrader: (0)
|
Did you guys use BMW dealer bought spark plugs? Only use BMW plugs. See my spark plug DIY why. OEM plugs can cause misfires.
135i Spark Plug replacement DIY... http://www.1addicts.com/forums/showthread.php?t=602804 |
![]() |
|
| 02-06-2013, 01:02 AM | #13 | |
|
YEAR ONE OF THE ONE
|
Quote:
|
|
|
|
|
| 02-06-2013, 12:14 PM | #14 |
|
Private
![]() |
My plugs were replaced by the dealer and presumably they used factory plugs. Started it up last night when it was cold and it ran rough again, this time logging misfires in cylinders one, two, three and the mysterious "other cylinders misfiring" code. I'm starting to think that the cylinder heads are lined with carbon/oil and this will require the old walnut shell treatment. Rats...
|
|
|
|
| 02-06-2013, 02:40 PM | #15 | |
|
Private First Class
![]() |
Quote:
|
|
|
|
|
| 02-06-2013, 07:06 PM | #16 | |
|
Moderator
Drives: 135i Silber mit/Rot 6MT N54 Join Date: Feb 2010
Location: Bayern, Germany
Posts: 13,327
iTrader: (0)
|
Quote:
I think we have two different opinions on OE and OEM parts. I prefer to use only OE instead of factory seconds(OEM). Feel free to use what ever you like on your car. IF you search over on the e90forum... you will find some people who had issues with aftermarket plugs. The price difference isn't that great... and I did not feel like re-doing the job a week or month or two later. I'd rather do a repair/maintenance job ONCE. Dack |
|
![]() |
|
| 02-07-2013, 05:21 AM | #17 |
|
Private
![]() |
My car has a little hiccup at idle too, just a minor stutter, the revs drop by 200 rpm then it comes back.
No codes logged & I'll live with it instead of crap laggy software ![]()
__________________
2010 Alpine White N55 135i 6MT - broken by BMW UK - awesome job lads!
2009 LMB LCI N54 135i - Cobb tuned! |
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|