Sponsored by The Tire Rack

[slow35i]

Hi guys im ordering my wheels on tuesday and wanted to see if they will fit, I currently have the car on h&r super sport lowering springs

Wheel specs

bolt pattern: 5x120offsets: +35 front & +40 rear wheel
finish: gloss black mesh face with polished step lip
wheel dimension: 19x8.5 front & 19x9.5 rear*

Also any recommendations on tire sizes thanks guys

[b1aze]

Not as easily as other wheels available. Do you have the means to dial in some camber or have your fenders rolled?

[slow35i]

I do have an alignment rack avalible, as far as adjustability its stock, I was lucky enough to get everything to spec even though I dropped it that much BARELY!

[b1aze]

I think you will have the hardest time with the fronts unless you run a 205ish wide tire. That offset is pretty low for our front ends.

[slow35i]

Well I bought my wheels today but I went with +45 all the way around, 18x8.5 front and 18x9.5 rear

Do you guys got any suggestion on tire sizes ? 35, 40, 45 side wall? Thanks guys

[b1aze]

You should be able to easily run 225/45 or 235/40 tires up front and 245/40 to 255/35 in the rear. The 255 will have more of a chance of rubbing if you don't roll your fenders or have a means of increased rear camber.

[slow35i]

I ordered my tires today, 235/40r18 fronts and 255/35r18 rear, bridgestone RE760 sports

[ilikebmxbikes]

You will probably rub in the rear and need a roll. People usually recommend at least an ET58 with a 9.5 rear aiming for 255/35/18

[b1aze]

Originally Posted by ilikebmxbikes

You will probably rub in the rear and need a roll. People usually recommend at least an ET58 with a 9.5 rear aiming for 255/35/18

I think that's a little conservative honestly. While the +58 is ideal, people are running 275s (z1 star specs no less) on +58 with a roll. There shouldn't be much issue running a 255 and if it rubs, it will be minimal. The drop also adds a bit of camber naturally so that will only help fit.

[bogart]

Probably should go with a 215/40 and 245/35 tire, and you should be fine. It's more difficult with just lowering springs vs coilovers, because you can't play around with the height.

[slow35i]

We will see I get my wheels tomorrow and my tires on friday, ill mount and balance them saturday and if I do need to roll them ill buy the tool from eastwood

[slow35i]

Got those bad boys mounted and installed, looks like I need to roll the fronts, no rub in the rear they look great though ill be ordering a fender roller tomorrow

[b1aze]

Originally Posted by slow35i

Got those bad boys mounted and installed, looks like I need to roll the fronts, no rub in the rear they look great though ill be ordering a fender roller tomorrow

Please read up on rolling the fenders on our cars. They can be a pain in the ass and you could really make them look like shit if you don't do it right.

[Suprgnat]

Back in the day, all we needed was a baseball bat to roll the fenders. Kids these days.

[slow35i]

Here are the before pictures

[slow35i]

Here are the pics with the wheels on still need to roll the fenders

[SGM <3]

If you're ever selling those wheels let me know, they're stunning!

And you're a local too, hopefully I'll run into your car at some point man.

[slow35i]

thank you i got them for $700 with free shipping, i spent more on the tires than the wheels