BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      04-26-2013, 07:43 AM   #1
SDS135
Second Lieutenant
 
Drives: 2009 BMW 135i M Sport
Join Date: Nov 2012
Location: Toronto, Ontario, Canada

Posts: 261
iTrader: (2)

Replaced rear brakes and wear sensor alarmed after install

I replaced my front and rear brakes. On the rears I just installed new pads (cool carbons) and a wear sensor because I couldn't get the rotors off and when I measured them they were less than 1mm thinner than the new rotors I bought (and still have). When I reset the wear sensor it originally re-calibrated to like 95000km (on the fronts I installed new pads and rotors, reading was 110000km) then a week or two later I got a warning light that the rear brakes need to be replaced in 1500km (fronts still said 110000km)... So I tried to reset the sensor again and screwed up both the front and rear readings and now I always get the warning light.
Does the rear wear sensor somehow detector rotor thickness (seems unlikely)? Maybe just a connection issue (seems doubtful they stick in there pretty good)? Any other suggestions on what I should do?
Thanks.
SDS135 is offline  
0
Reply With Quote
      04-26-2013, 08:02 AM   #2
Dackelone
Moderator
 
Dackelone's Avatar
 
Drives: 135i Silber mit/Rot 6MT N54
Join Date: Feb 2010
Location: Bayern, Germany

Posts: 15,084
iTrader: (1)

So you replaced BOTH front(LF) and rear(RR) brake pad wear sensors?

And then you reset them with my DIY ?

DIY resetting service "due" lights…
http://www.1addicts.com/forums/showthread.php?t=415111



You are getting a red or yellow light like this --> (0) or like this... (0) with the kms under the circles. ?
Dackelone is offline   Germany
0
Reply With Quote
      04-26-2013, 08:11 AM   #3
uberschnell
Brigadier General
 
uberschnell's Avatar
 
Drives: // 135i //, X5
Join Date: Mar 2007
Location: Bay Area

Posts: 3,368
iTrader: (43)

I think you are talking about 2 things. The wear pad sensors that attach to the brake pad and the service interval indicator system.

The wear pads are a go/no-go sensor. They don't measure anything, they simply open a circuit when the tips of the sensor are worn down. Your Service level indicator counts down the time/miles from a pre-set point. It does not measure anything either except time and miles.

Nothing that I know of on our cars measures the rotor thickness.
uberschnell is offline   No_Country
0
Reply With Quote
      04-26-2013, 09:33 AM   #4
SDS135
Second Lieutenant
 
Drives: 2009 BMW 135i M Sport
Join Date: Nov 2012
Location: Toronto, Ontario, Canada

Posts: 261
iTrader: (2)

Quote:
Originally Posted by Dackelone
So you replaced BOTH front(LF) and rear(RR) brake pad wear sensors?

And then you reset them with my DIY ?

DIY resetting service "due" lights…
http://www.1addicts.com/forums/showthread.php?t=415111



You are getting a red or yellow light like this --> (0) or like this... (0) with the kms under the circles. ?
I replaced both the front and rear wear sensors and used your DIY exactly and at first I got the correct results. The alarms were reset, it showed 94000km until next pad change on the rears and I thought it was finished. Now I get the red 'parking brake light' illuminated always which says rear pads need to be replaced. I did the computer scan using the BC button and it said front brakes: 110000km and rear brakes: 1300km (a week after I did my brakes). I reset again hoping it would go back to 90000km+ but instead my front brakes: ??? And rear brakes: ??? And when I turn the car off now I get the red symbol of the car on the hoist thing.
SDS135 is offline  
0
Reply With Quote
      04-26-2013, 09:36 AM   #5
SDS135
Second Lieutenant
 
Drives: 2009 BMW 135i M Sport
Join Date: Nov 2012
Location: Toronto, Ontario, Canada

Posts: 261
iTrader: (2)

Quote:
Originally Posted by MteK
I think you are talking about 2 things. The wear pad sensors that attach to the brake pad and the service interval indicator system.

The wear pads are a go/no-go sensor. They don't measure anything, they simply open a circuit when the tips of the sensor are worn down. Your Service level indicator counts down the time/miles from a pre-set point. It does not measure anything either except time and miles.

Nothing that I know of on our cars measures the rotor thickness.
I agree. My wear sensors are brand new and the pads are brand new. They sensors cannot be reading anything wrong from a thickness standpoint. I reset the computer using the DIY and again it seemed to work... Then it just changed back and said replace rear brakes. I didn't have this issue on the fronts and the only difference with the fronts is I also installed new rotors. But there is no way that just because I used the original rear rotors that the car alarmed because of that.
SDS135 is offline  
0
Reply With Quote
      04-26-2013, 09:39 AM   #6
chesterfan1230
Colonel
 
chesterfan1230's Avatar
 
Drives: a Bat Mobile :)
Join Date: Apr 2008
Location: NJ

Posts: 2,480
iTrader: (9)

Garage List
2010 BMW 135i  [5.00]
Send a message via AIM to chesterfan1230
Maybe you damaged the wear sensors. They're really easy to break.
__________________
What's a Mod?
chesterfan1230 is offline  
0
Reply With Quote
      04-26-2013, 09:50 AM   #7
SDS135
Second Lieutenant
 
Drives: 2009 BMW 135i M Sport
Join Date: Nov 2012
Location: Toronto, Ontario, Canada

Posts: 261
iTrader: (2)

Quote:
Originally Posted by chesterfan1230
Maybe you damaged the wear sensors. They're really easy to break.
I will Check but when I first installed it it worked. Small chance I damaged the sensor afterwards... When you stick it in there and hear the click it wouldn't come loose.
SDS135 is offline  
0
Reply With Quote
      04-26-2013, 09:51 AM   #8
SDS135
Second Lieutenant
 
Drives: 2009 BMW 135i M Sport
Join Date: Nov 2012
Location: Toronto, Ontario, Canada

Posts: 261
iTrader: (2)

I think it has something to do with the reset but when I did it, it just reset me back to: '???'
SDS135 is offline  
0
Reply With Quote
      04-26-2013, 12:56 PM   #9
08LMB135i
Rally Armored 135i, don't copy me!
 
Drives: 2008 Lemans Blue 135i M Sport
Join Date: Aug 2012
Location: Calgary Alberta

Posts: 186
iTrader: (0)

I put new pads/sensors in last weekend at 53000km and both front and rear are reading 50000km left after reset now, each car must be different.
08LMB135i is offline  
0
Reply With Quote
      05-03-2013, 07:39 AM   #10
SDS135
Second Lieutenant
 
Drives: 2009 BMW 135i M Sport
Join Date: Nov 2012
Location: Toronto, Ontario, Canada

Posts: 261
iTrader: (2)

Any suggestions!? What I should do!? Ill try and reset it again today.
SDS135 is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:30 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST