BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      05-08-2013, 03:28 PM   #1
Pablito1702
Pablo
 
Drives: 2009 135i
Join Date: Dec 2009
Location: Orange County, CA

Posts: 251
iTrader: (2)

Question OK to re-use pads when replacing rotors?

I got 46,000 miles out of my front pads before the dealer replaced them and front sensor under warranty. At that time the front rotors were still within minimum spec (24.7 mm actual versus 24.4 min) so they would not replace under warranty.

That was 10,000 miles ago, so the "new" pads are presumably less than 20% worn. Now intending to replace front rotors with stock BMW or drilled BMW performance rotors (almost same price). Can I re-use the existing pads? What about sensor. Thanks in advance.
__________________
BMW PPK V2, M3 26mm sway bar, M3 front control arm kit, M3 steering wheel, BMW 313 wheels w Michelin PSS
Pablito1702 is offline   United_States
0
Reply With Quote
      05-09-2013, 02:17 AM   #2
RimasRS
Colonel
 
RimasRS's Avatar
 
Drives: 135i MT 2009 AW
Join Date: Sep 2010
Location: Europe

Posts: 2,396
iTrader: (0)

I wouln't use same pads
RimasRS is offline  
0
Reply With Quote
      05-09-2013, 06:40 AM   #3
jordantii
Private First Class
 
Drives: 2011 135i M-Sport
Join Date: Aug 2010
Location: Tampa Bay

Posts: 162
iTrader: (0)

Yes you can use them. Just make sure you bed them in just like a new pad. You may have reduced braking for a short time (I doubt it though), but other than that go ahead and use them.
jordantii is offline  
0
Reply With Quote
      05-09-2013, 07:07 AM   #4
Ian///M
Major General
 
Ian///M's Avatar
 
Drives: 1M
Join Date: Mar 2011
Location: AU

Posts: 6,220
iTrader: (0)

New pads
__________________
BMW 1M VO - Cobb + PTF e-Tune, Akrapovic wireless, MadDad mids, ETS 5" FMIC, ER CP, TurboSmart PB DV's, SSK, CDV, OCC, AWRON Gauge, Hankook RS-3's, Vorshlag Camber plates
Ian///M is offline   No_Country
0
Reply With Quote
      05-09-2013, 04:28 PM   #5
MLSavage
Second Lieutenant
 
MLSavage's Avatar
 
Drives: 2010 135i AW 6MT
Join Date: Feb 2013
Location: Jacksonville, FL

Posts: 278
iTrader: (0)

Quote:
Originally Posted by jordantii View Post
Yes you can use them. Just make sure you bed them in just like a new pad. You may have reduced braking for a short time (I doubt it though), but other than that go ahead and use them.
This sums it perfectly.

A brandishing (bed-in) of the rotor with the current pads will suffice, no need to spend more for new pads at this point.
__________________
2010 N54 135i - Alpine White - 6MT - M-Sport - LCI Blacklines - 1M Mirrors - PSS - Powdercoated Black 261M
SELLING MY CAR
MLSavage is offline   United_States
0
Reply With Quote
      05-09-2013, 04:48 PM   #6
jordantii
Private First Class
 
Drives: 2011 135i M-Sport
Join Date: Aug 2010
Location: Tampa Bay

Posts: 162
iTrader: (0)

And you can use the sensor as well.
jordantii is offline  
0
Reply With Quote
      05-09-2013, 08:09 PM   #7
blutattoo
First Lieutenant
 
Drives: 2012 135i
Join Date: Jun 2012
Location: Sacramento

Posts: 375
iTrader: (1)

Garage List
2012 BMW 135i  [0.00]
Quote:
Originally Posted by jordantii View Post
Yes you can use them. Just make sure you bed them in just like a new pad. You may have reduced braking for a short time (I doubt it though), but other than that go ahead and use them.
+1 a lot of us switch pads back and forth from track pads to street pads. Just do a proper bedding procedure and you'll be fine.

A little side note some shops will not do it for you for liability purposes so you may have to DIY it or find a different shop. Ask before hand so they don't try and hard sell you on new pads.
blutattoo is offline  
0
Reply With Quote
      05-10-2013, 02:02 PM   #8
Ehwnnc
Second Lieutenant
 
Ehwnnc's Avatar
 
Drives: 135i
Join Date: Mar 2012
Location: North Carolina

Posts: 237
iTrader: (0)

new pads, i never put new stuff with old stuff. I always replace rotors when i do pads as well
__________________
Ehwnnc is offline  
0
Reply With Quote
      05-10-2013, 02:31 PM   #9
jordantii
Private First Class
 
Drives: 2011 135i M-Sport
Join Date: Aug 2010
Location: Tampa Bay

Posts: 162
iTrader: (0)

Quote:
Originally Posted by Ehwnnc View Post
new pads, i never put new stuff with old stuff. I always replace rotors when i do pads as well
You can do that but if you are on a budget and the pads have 80% left go ahead and use them. Like one of the posters said, many track guys switch back an forth on a regular basis.

There is absolutely no reason to not us the pads if they have a lot of life left in them. No one can give a reason based on physics or mechanical engineering that only new pads should be used when replacing rotors.

And if the rotors have life in them why replace them if only pads are needed? Just piece of mind? That's cool if it is.

I know it's normal to do both at the same time but...
jordantii is offline  
0
Reply With Quote
      05-10-2013, 03:04 PM   #10
NorthernDancer
First Lieutenant
 
Drives: 325iX & 128
Join Date: Apr 2011
Location: Ottawa On Canada

Posts: 391
iTrader: (2)

Yes, re-use the pads. Maybe rough them up slightly with sandpaper.
NorthernDancer is offline  
0
Reply With Quote
      05-10-2013, 08:07 PM   #11
JTB
Private
 
JTB's Avatar
 
Drives: 135i
Join Date: Jan 2013
Location: Colorado

Posts: 72
iTrader: (1)

I have done this more times than I can count without issue. Do a couple solid stops to seat them; this, however, is almost unnecessary as there is no epoxy to burn off.

BTW - skip the drilled rotors.
__________________
JTB
Spec Miata - 2nd RMR 2013
2009 135i - let the modding begin!
JTB is offline  
0
Reply With Quote
      05-17-2013, 11:02 AM   #12
JTB
Private
 
JTB's Avatar
 
Drives: 135i
Join Date: Jan 2013
Location: Colorado

Posts: 72
iTrader: (1)

I should mention that I mark the pads - left or right wheel and inside / outside. When I put them back in, I put them in the same place they were previously.
__________________
JTB
Spec Miata - 2nd RMR 2013
2009 135i - let the modding begin!
JTB is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:52 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST