[Andystobbs]

Does your szl stalk have a 'gate' for a light press to increase / decrease speed and then a harder push in each direction moves the lever past a click?

[SDN]

Originally Posted by Andystobbs

Does your szl stalk have a 'gate' for a light press to increase / decrease speed and then a harder push in each direction moves the lever past a click?

Yes, i can click it 2 times forward and 2 times backwards if that is what you mean?

[F31B48]

Originally Posted by SDN

Okay so i did the following: Ncs expert- revtors- start- chassis E89- Back- Process ECU- LDM (later FRM and Kombi too)- Codierendaten lessen- execute job- Workfolder- deleted data to 0- Change job to SG codieren- execute job. These modules shouldl now be set to default right?

Bit late to the party, but i did this exact retrofit to my old E90. I can't see anywhere where you say you have default coded the DSC. Have you done that?

[SDN]

Originally Posted by F31B48

Bit late to the party, but i did this exact retrofit to my old E90. I can't see anywhere where you say you have default coded the DSC. Have you done that?

Hi, o really? Did you retrofit the LDM aswell? And does the DSC needs to be default coded?

[F31B48]

Originally Posted by SDN

Hi, o really? Did you retrofit the LDM aswell? And does the DSC needs to be default coded?

Yes i had to fit the LDM as well as mine was a 12/05 build. The DSC has to be coded as well from memory. Try that and see how you get on.

I might still have the .trc files from my modules on my laptop. If you get stuck i could have a look for them for you.

[SDN]

Originally Posted by F31B48

Yes i had to fit the LDM as well as mine was a 12/05 build. The DSC has to be coded as well from memory. Try that and see how you get on.

I might still have the .trc files from my modules on my laptop. If you get stuck i could have a look for them for you.

I think i've done that already. I did codierendaten lessen for the DSC in revtors, then emptied the MAN file and did SG codieren.

[F31B48]

Have you read through the .trc files with NCS Dummy to see if the settings are correct?

[F31B48]

If you clear the fault codes, does the 9520 Lenkrad MFL mechanisch defekt Kontakt fault keep returning?

[SDN]

Originally Posted by F31B48

If you clear the fault codes, does the 9520 Lenkrad MFL mechanisch defekt Kontakt fault keep returning?

Yes it kept returning.

I just installed a kombi high and this has done the trick. When i press the CC stalk the kombi displays the CC arrow, so it all works now!

Thanks for all the help!

[e90yyc]

Originally Posted by Hoody007

You have the low Kombi - are you sure it supports dynamic cruise control?

^ correctly called that one. Nice. I didn’t know there were multiple KOMBI variants for E90s. Did we only get the high variant in NA?

OP glad you got it sorted. You probably know this now, but Dynamic Cruise is just the fancy name for $544.

[SDN]

Originally Posted by e90yyc

^ correctly called that one. Nice. I didn’t know there were multiple KOMBI variants for E90s. Did we only get the high variant in NA?

OP glad you got it sorted. You probably know this now, but Dynamic Cruise is just the fancy name for $544.

Yes Hoody007 got it right.
In hindsight the error "ecu service not supported" should have ringed a bell, the CC not being supported by the kombi.

The high kombi is actually much nicer than the low version. When activating the CC a white dot appears at the chosen speed.

[F31B48]

Nice work, glad it's all sorted. My CC worked with the low kombi for whatever reason. You're right though, the high kombi is much nicer and definitely worth changing.

[Bryjosh316]

Did you flash the kombi? Is there a specific kombi i should buy or any hi kombi for e90 will work

[Bryjosh316]

Originally Posted by F31B48

Nice work, glad it's all sorted. My CC worked with the low kombi for whatever reason. You're right though, the high kombi is much nicer and definitely worth changing.

How did you make your low kombi work.i have similar situation installed LDM and now same error i am getting.. with sdn..thinking to buy kombi high but dont know if i should buy a specific one.