|
|
|
12-07-2017, 11:33 AM | #463 | |
Lieutenant
428
Rep 546
Posts |
Quote:
__________________
2011 BMW 135i ///M-Sport, DCT
Bilstein B12 kit, Dinan camber plates, M3 front control arms, Whiteline poly RSFB, MHD Stage 1, cp-e Charge Pipe, H&R Front sway bar, BMW performance diffuser |
|
Appreciate
0
|
01-24-2018, 04:58 PM | #464 |
Private First Class
82
Rep 122
Posts
Drives: 08 135i AT
Join Date: Sep 2016
Location: Austin, Texas
|
Hey everyone im finally going to start putting my car through some track days and auto cross events and have a tire question.
Currently just have stock wheels running PSS in the rear 255/35 and stock run flats on the front 225/40 going to get some new fronts next week and would like to bump up to 235/40 but they come in .4" taller than the rears will that cause any problems? Better to just stick with 225/40 until i get bigger wheels? not trying to be super competitive just out to have fun but if i can mount up a little more width up front obviously that would be ideal. Thanks in advance
__________________
08 135i AT / xHP stage 3 trans flash / vrsf 7.5 hd FMIC/ docrace single 6266 dbb precision turbo kit / TCKline s/a coilovers / RB external pcv kit / Active Autowerke ChargePipe / Wavtrac lsd / Whiteline subframe and Diff Full bushings / WedgeTuning full e85 custom tune 26psi / Blackmarketparts Port Injection Kit
|
Appreciate
0
|
01-25-2018, 11:18 AM | #465 | |
Lieutenant
428
Rep 546
Posts |
Quote:
__________________
2011 BMW 135i ///M-Sport, DCT
Bilstein B12 kit, Dinan camber plates, M3 front control arms, Whiteline poly RSFB, MHD Stage 1, cp-e Charge Pipe, H&R Front sway bar, BMW performance diffuser |
|
Appreciate
0
|
01-25-2018, 09:20 PM | #466 | |
Private First Class
82
Rep 122
Posts
Drives: 08 135i AT
Join Date: Sep 2016
Location: Austin, Texas
|
Quote:
__________________
08 135i AT / xHP stage 3 trans flash / vrsf 7.5 hd FMIC/ docrace single 6266 dbb precision turbo kit / TCKline s/a coilovers / RB external pcv kit / Active Autowerke ChargePipe / Wavtrac lsd / Whiteline subframe and Diff Full bushings / WedgeTuning full e85 custom tune 26psi / Blackmarketparts Port Injection Kit
|
|
Appreciate
0
|
03-01-2018, 05:45 AM | #467 |
Lieutenant
63
Rep 448
Posts |
If anybody wants any of the following, they're all up for grabs:
Vorshlag Camber Plates, only test fitted (currently have 60mm perches for them, but other perches are very cheap to buy new). Active Autowerke Headers 328i SULEV Aluminum Calipers Forgestar F14 17x9 ET35F / ET50R. Could bundle 245 Rival S 1.5s into the deal if someone wanted them. Also have a custom rear section exhaust (everything after headers, burns stainless merge, 3in race cat, resonator, v-banded rear section with two different mufflers, 5min swap between them, the larger muffler is nearly stock on the street, even the race muffler is very streetable). I'd need a stock 128 exhaust (a small amount of the OE piping was used to make this, the bend right off the header), so mine was destroyed in the process, but only a couple hundred bucks + the stock exhaust is fine. Front 27mm adjustable SuperPro bar, Hotchkis Endlinks. Eventually I'll also have the Diffsonline custom 3-clutch diff for sale and the 20mm rear bar, but that's more of an ordeal to remove so may take a bit as my garage is presently fully taken up prepping other cars. Everything on here will be sold pretty much at fire-sale prices. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|