|
|
|
12-25-2012, 03:17 PM | #1 |
Enlisted Member
3
Rep 48
Posts |
need some help on wheel set up
hi guys, looking to buy some bbs LM replica's and just need some help figuring out if these specs would be ok 18x8.5 front/18x9.5 rear, 45mm offset front and rear, lip size 1.25" front/2.5" rear, hub bore size 72.6mm
i am also wanting to lower the vehicle with H&R super sport springs |
12-25-2012, 03:38 PM | #2 |
Just one more taste...
566
Rep 2,011
Posts |
The 45 offset in the rear will force you to run a narrow 255/average 245 tire in the rear. The front offset is fine for a 225/narrow 235 tire. If you're ok with the "stretched" look in the rear, it should be a good looking setup.
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|