|
|
|
04-02-2014, 10:16 AM | #1 |
New Member
0
Rep 7
Posts |
18" Staggered RIVA DTM on my E87
Hi guys,
I drive a 2006 E87 116i m sport and am looking at replacing the stock m sport wheels for something a little different. how well do you think the wheels in the below link would fit? too big? http://www.********.com/index.php?ro...product_id=781 Responses are very much appreciated! Thanks. |
04-02-2014, 10:24 AM | #2 |
Colonel
172
Rep 2,347
Posts |
very aggresive
you'd have to really max camber out in the back and roll pull fenders. id say dont do it.
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
04-02-2014, 12:01 PM | #4 | |
Captain
326
Rep 914
Posts |
Quote:
Front: You will need to add more camber and roll/pull the fenders as these will poke out around 22mm more. BMW 261 wheels are 18x7.5 +49 and these are 18x8 +34. Rear: BMW Style 261 rear wheels are 18x8.5 +52, these are 19x8.5 +37. That's only 15mm of poke. But if you get a mild fender roll they should work fine, there are people on here running the stock wheels with 15mm spacers, which is effectively the same offset you are looking at. I ran 12mm spacers on my stock Style 261 wheels with stock fenders and only rubbed on hard bumps in the rear. No problems at all in the front (every car is different, mind you). |
|
Appreciate
0
|
04-03-2014, 06:47 AM | #6 |
Captain
326
Rep 914
Posts |
With the wheels you posted you wouldn't want spacers. I was telling you about my wheel specs with spacers and how they would compare. A good place for quality spacers is Adaptec Speedware. Send them a message on Facebook with what you want and they'll hook you up.
https://www.facebook.com/#!/adaptecspeedware |
Appreciate
0
|
04-04-2014, 12:39 PM | #8 | |
Second Lieutenant
14
Rep 250
Posts |
Quote:
Should work with a fender roll.
__________________
BMW E88 125i - Tunex Tuned@ 228whp - Cyba Scoops - Performance Kidneys - Performance Exhaust - Performance Intake - BMW Strutbar - 3d Design Carbon Diffuser - Blacklines - Golf Tee - FK Coilovers - Klutch SL14
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|