ecs shifter rebuild kit

[no6thgear]

Got the shifter rebuild kit. Everything makes sense when looking at the schematic breakdown on where everything will go except for the 4 white bushings.

Ecs support response "pay attention to how it's dissassembled and youl see"

does anyone know exactly where they go?

[Derk1127]

Originally Posted by no6thgear

Got the shifter rebuild kit. Everything makes sense when looking at the schematic breakdown on where everything will go except for the 4 white bushings.

Ecs support response "pay attention to how it's dissassembled and youl see"

does anyone know exactly where they go?

If it is the bushings that are cylindrical and are oval on one side it goes into the shifter fork. Once you get your mid pipe and heat shielding off you'll get to the shifter fork. The bushings go inside the front part of the fork. I have a N54 and its a bitch to get to. If I were you and if you have any desire to get a short shifter too, I would put it in while you are down there.