|
|
|
07-27-2010, 04:58 PM | #1 |
Private First Class
4
Rep 189
Posts |
Can i put 235/40 in front wheels
I have a eibach pro kit,now i have -1,5 degree in front wheels.I desagree whit my toyo t1r tyres and i like to muont bridgestone potenza s001.To rear i don´t have any problem because i can mount 255/35,but to front i don´t buy 225 because only made 235/40.Anybody know if is possible muont this size whitout rubbing.
__________________
135ijb3, h & r filter, SSK, CDV,clutch stop, klracing fmic,seccond catted ,225-255 michelin ps3, E93F-E92R swaybars.M3 parts front.M3 tension rear.Plates mod(F-2,0º R-1,5º).Bilstein + stock springs.Ps rotors.Subframe bushings.Weichers fstruut.Finally mods sdiff and raceland dp.
|
07-27-2010, 09:26 PM | #2 |
New Member
2
Rep 17
Posts |
im running 235/40 in front and without camber plates i scrape on my fenders all the time, other then that it looks and drives wonderful!
__________________
2009 135i |Apex Wheels | S-drive tires | Power chip | MS Downpipes | Custom Exhaust | BMS Filter
|
Appreciate
0
|
07-30-2010, 01:56 PM | #3 |
Major
114
Rep 1,323
Posts |
A 235/40 front tire is pushing it, however with your extra camber you might be able to get away with it. I would think it's worth a try as any rubbing that MAY occur will be very minimal, most likely only a full lock on the steering.
|
Appreciate
0
|
07-30-2010, 02:49 PM | #4 |
Private First Class
6
Rep 132
Posts |
I have been running for 1 year a 235/40 18 on an 8" wide wheel with a 45mm offset, moving the center of the wheel 2mm towards the outside, and have never had a rub. I have Hankook Ventus V12 evo k110 tires.
My tire on a wider rim moved 2mm further out should be more likely to rub than a stock 49mm offset 7.5" wide rim. The people that are rubbing either have a lot more weight or bottom their suspension often. I cannot explain it? Good Luck! |
Appreciate
0
|
07-31-2010, 07:29 AM | #5 |
Private First Class
4
Rep 189
Posts |
thanks, i will try it.
__________________
135ijb3, h & r filter, SSK, CDV,clutch stop, klracing fmic,seccond catted ,225-255 michelin ps3, E93F-E92R swaybars.M3 parts front.M3 tension rear.Plates mod(F-2,0º R-1,5º).Bilstein + stock springs.Ps rotors.Subframe bushings.Weichers fstruut.Finally mods sdiff and raceland dp.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|