United BMW

S54dan · 08-20-2010, 01:16 PM

Reduce body roll with one of these two swaybars, your choice!

M3 Swaybar for your BMW E82 - $245.70 shipped to the lower 48 States.
Continental 48 States: $0.00
Alaska/Hawaii: $28.00
Canada: $55.00
Australia/Asia/Europe: $85.00

Fitment is for 2008-2011 BMW 1 Series

Parts are genuine BMW, however they will not carry the BMW limited warranty because they do not belong on the car. Use are your own risk. By purchasing this product through our check-out process, you agree that United BMW of Roswell is not responsible for any damage done to your vehicle.

Specs
Swaybar Weight: 3.5 pounds
Additional info: Comes with (2) bushings and (2) stabilizer supports.

Choose between a 28mm E93 M3 swaybar or a 26.5mm E92 M3 swaybar.

UUC Swaybar for your BMW E82 - $250.00 plus shipping
Continental 48 States: $13.25
Alaska/Hawaii: $28.00
Canada: $55.00
Australia/Asia/Europe: $85.00

Fitment is for 2008-2011 BMW 1 Series

- Revised contouring for maximum clearance even with extremely lowered cars.
- Precision-cut adjustable ends.
- Positive-stop rear bushing guides assure bar stays in place.
- Urethane bushings, hardware kit, and lubrication included.

Superior Materials
We put our bars through this extensive process to insure that the final product will be the strongest, most durable bar on the market, and that it will be the most resistant to form alteration.
Adjustability
The SwayBarbarian uses a multi-hole system on the front and rear bars which allows for fine tuning of the bar for whatever desired effect, without sacrificing body roll.

Thank you!

Dan Miles

escobar929 · 08-20-2010, 01:19 PM

I see the M3 swaybar comes w/ bushings and stabilizer supports but is there anything else needed to install these on an e82?

S54dan · 08-20-2010, 01:22 PM

Yep, should be it!

S54dan · 09-02-2010, 03:45 PM

08-20-2010, 01:16 PM	#1
S54dan I no longer work for United BMW! 308 Rep 3,330 Posts Drives: E46 M3, E46 330i ZHP, E36 325i Join Date: Jan 2008 Location: Atlanta, GA iTrader: (36) Garage List 1994 BMW 325i [8.50] 2005 M3 [9.66] 2005 325i [8.00] 2003 330i ZHP [9.00]	United BMW - Front Swaybar (E93 M3 28mm, UUC 27mm) Reduce body roll with one of these two swaybars, your choice! M3 Swaybar for your BMW E82 - $245.70 shipped to the lower 48 States. Continental 48 States: $0.00 Alaska/Hawaii: $28.00 Canada: $55.00 Australia/Asia/Europe: $85.00 Fitment is for 2008-2011 BMW 1 Series Parts are genuine BMW, however they will not carry the BMW limited warranty because they do not belong on the car. Use are your own risk. By purchasing this product through our check-out process, you agree that United BMW of Roswell is not responsible for any damage done to your vehicle. Specs Swaybar Weight: 3.5 pounds Additional info: Comes with (2) bushings and (2) stabilizer supports. Choose between a 28mm E93 M3 swaybar or a 26.5mm E92 M3 swaybar. UUC Swaybar for your BMW E82 - $250.00 plus shipping Continental 48 States: $13.25 Alaska/Hawaii: $28.00 Canada: $55.00 Australia/Asia/Europe: $85.00 Fitment is for 2008-2011 BMW 1 Series - Revised contouring for maximum clearance even with extremely lowered cars. - Precision-cut adjustable ends. - Positive-stop rear bushing guides assure bar stays in place. - Urethane bushings, hardware kit, and lubrication included. Superior Materials We put our bars through this extensive process to insure that the final product will be the strongest, most durable bar on the market, and that it will be the most resistant to form alteration. Adjustability The SwayBarbarian uses a multi-hole system on the front and rear bars which allows for fine tuning of the bar for whatever desired effect, without sacrificing body roll. Thank you! Dan Miles __________________ BMW CCA, PCA, & CHIN Motorsports Instructor.
	Appreciate 0 Tweet Quote

08-20-2010, 01:19 PM	#2
escobar929 Brigadier General 154 Rep 4,528 Posts Drives: M2 CS Join Date: Aug 2009 Location: Hollywood, FL iTrader: (14) Garage List 2020 M2 CS [10.00] 2020 M240i [0.00]	I see the M3 swaybar comes w/ bushings and stabilizer supports but is there anything else needed to install these on an e82?
	Appreciate 0 Quote

08-20-2010, 01:22 PM	#3
S54dan I no longer work for United BMW! 308 Rep 3,330 Posts Drives: E46 M3, E46 330i ZHP, E36 325i Join Date: Jan 2008 Location: Atlanta, GA iTrader: (36) Garage List 1994 BMW 325i [8.50] 2005 M3 [9.66] 2005 325i [8.00] 2003 330i ZHP [9.00]	Yep, should be it! __________________ BMW CCA, PCA, & CHIN Motorsports Instructor.
	Appreciate 0 Quote

09-02-2010, 03:45 PM	#4
S54dan I no longer work for United BMW! 308 Rep 3,330 Posts Drives: E46 M3, E46 330i ZHP, E36 325i Join Date: Jan 2008 Location: Atlanta, GA iTrader: (36) Garage List 1994 BMW 325i [8.50] 2005 M3 [9.66] 2005 325i [8.00] 2003 330i ZHP [9.00]	__________________ BMW CCA, PCA, & CHIN Motorsports Instructor.
	Appreciate 0 Quote