Sponsored by The Tire Rack

[C.junior]

Will 18x9.5 with 35mm offset fit my 09 135 square set up front and back
And if I use my stock tires they are still new I think they are 245 35 18 and 215 40 18

Thanks

I want the 3" lip all around on the bbs lm reps that's why

[b1aze]

Will take significant work to make that fit on all 4 corners.

[Stohlen]

WAYYYYYY too much stretch and probably will still rub like crazy. Don't do it.

For comparasion the proper offset for a 18x9.5 wheel is +62.

[C.junior]

How about 18x8.5 +35 front 18x9 +35 back

[b1aze]

http://www.1010tires.com/Tools/Wheel-Offset-Calculator

Do some homework

[cooler2442]

Originally Posted by C.junior

How about 18x8.5 +35 front 18x9 +35 back

You will need to roll fenders and run -3 camber in the rear to fit. Front should work with just negative camber.

[Wescuddles]

Originally Posted by Stohlen

WAYYYYYY too much stretch and probably will still rub like crazy. Don't do it.

For comparasion the proper offset for a 18x9.5 wheel is +62.

There isn't a proper offset. Anything down to 10.5 wide +25 has fit just depends on how much work and camber you want.

[C.junior]

so whats the proper size to run with my stock tires for 18s what offset and i want
8.5 front and 9 back or 9 all around bit of stretch i also don't mind

[SGJB135i]

I have a 18x10.5 et 44 with a 245/35/18, i could fit a 255/35/18 but i LOVE the stretch look, I have very low, and i do not rub at all, i think i do just a little with 4 people, but ive only done that twice since ive owned the car (3 years). My fenders are shaved. So if you are willing to shave, then you wont have a problem, for the front, i beleive a 9.5 hits the strut but i am be wrong, im running a 18x9 et 28 with a 215/35/18 and i rub just a little, very tad bit, but i am even lower on the front than the back, stock fender, no work to it! so you might be able to get a idea from there! good luck!

[ChrisRoman]

revival. so 18x9 +35 with a 215/35/18 in the front should rub a tad bit if i were to slam my car like jetblack135? im planning on running 18x9 +35 18x9.5 +35.

[Tiny Chainsaw]

Originally Posted by ChrisRoman

revival. so 18x9 +35 with a 215/35/18 in the front should rub a tad bit if i were to slam my car like jetblack135? im planning on running 18x9 +35 18x9.5 +35.

215/40/18 8.46in wide 18x9 38 +30mm poke from stock 1.54in stretch

specs from my calculations, no rub.

You should be able to run ET38 maximum with a 9in rim in front without rubbing on the strut.