Brisbane Suspension Workshops

BMW86 · 11-16-2009, 07:26 PM

I'm looking at getting either coilovers or springs for my 135i. Can anyone recommend any good workshops in Brisbane?

Also, I would appreciate it if anyone could share the costs of installation for their spring or coilover setup.

Brissie · 11-16-2009, 09:03 PM

I would like to know too!
Have you decided what you are going to get?

BMW86 · 11-16-2009, 10:13 PM

Quote:

Originally Posted by bmw135fan

I would like to know too!
Have you decided what you are going to get?

Either the H&R Sport Springs, KW V1's or KW V2's. I can't decide between the coilovers and I'm probably never going to track my car so it would be wiser to go with V1's.

dontask · 11-16-2009, 10:30 PM

Why does everyone like coilovers so much? Don't you have to realign the suspension (particularly camber) evertime you adjust the height?

sparoz · 11-17-2009, 07:38 AM

Quote:

Originally Posted by BMW86

Either the H&R Sport Springs, KW V1's or KW V2's. I can't decide between the coilovers and I'm probably never going to track my car so it would be wiser to go with V1's.

In that case wouldn't it just be easier going with the Koni FSDs which have got loads of good feedback?

BMW86 · 11-17-2009, 03:00 PM

Quote:

Originally Posted by sparoz

In that case wouldn't it just be easier going with the Koni FSDs which have got loads of good feedback?

If I forked out the money for Koni's FSDs I'd rather spend that little bit extra and get the V1's which are the same as V2's without damper adjustments.

TimMc · 11-17-2009, 08:28 PM

Ken Graham from "Accurate Suspension" (Brisbane) built the coil-overs, installed camber plates etc for my E30. Justin Wade from Midas Tingalpa put me onto him. I'd recommend him.

11-16-2009, 07:26 PM	#1
BMW86 Major General 398 Rep 9,156 Posts Drives: RS3 Sedan / Macan S Join Date: Jul 2008 Location: Australia iTrader: (0)	Brisbane Suspension Workshops I'm looking at getting either coilovers or springs for my 135i. Can anyone recommend any good workshops in Brisbane? Also, I would appreciate it if anyone could share the costs of installation for their spring or coilover setup.
	Appreciate 0 Tweet Quote

11-16-2009, 09:03 PM	#2
Brissie Lieutenant 36 Rep 579 Posts Drives: 135 Join Date: May 2009 Location: brisbane, Oz iTrader: (0)	I would like to know too! Have you decided what you are going to get?
	Appreciate 0 Quote

11-16-2009, 10:30 PM	#4
dontask Second Lieutenant 13 Rep 286 Posts Drives: White BMW 135i Join Date: Mar 2009 Location: Brisbane iTrader: (1)	Why does everyone like coilovers so much? Don't you have to realign the suspension (particularly camber) evertime you adjust the height? __________________ Modded 135i RHD Bumblebee
	Appreciate 0 Quote

11-17-2009, 08:28 PM	#7
TimMc Lieutenant Colonel 44 Rep 1,883 Posts Drives: E90 M3 Join Date: Aug 2008 Location: Brisbane, Australia iTrader: (0)	Ken Graham from "Accurate Suspension" (Brisbane) built the coil-overs, installed camber plates etc for my E30. Justin Wade from Midas Tingalpa put me onto him. I'd recommend him. __________________ Driving - Manual E90 M3 (Melbourne Red/Black). Riding - BMW R1200RS Sport.
	Appreciate 0 Quote